QTP 16

Quick Terminal Panel - 16 keys, 4 Opto-In

QTP 16 - View of the availables models

QTP 16 English Tech. Manual PDF format.

Ver. 5.20 - Rel. 21 February 2000.

QTP-Editor

QTP-Show

QTP 16 is a complete IP-54 operator panel, specifically designed for industrial use and for direct mounting on automatic machinery. It is, in every respect, video terminals suitable to be the direct interface between operator and machinery in any of the control or comand operations which could be necessary during running or diagnostic of the same. QTP 16 is available with Alphanumeric Fluorescent or LCD Displays, backlite or not and with 20 characters for 2 or 4 lines. The QTP 16 affords 16 Keys. A label slot can be used to carry a name for the QTP 16 or the user's own logo. The basic QTP 16 can be expanded utilizing the various options available, namely serial EEPROM, up to 2 Kbyte capacity for message saving; 4 Optocoupled Input Lines used as user input (readable through serial line) or for direct management of 16 messages; etc. The QTP 16 is able to execute an entire range of display commands, including Clear Screen, Position cursor, EEPROM reading or writing, etc., with code compatibility similar to that of the ADDS ViewPoint video terminal. Features of QTP 16 are as follows:

• - Overall dimension: 96x192 mm frontal frame size; 8 mm frontal frame depth; 22 mm rear metallic housing depth
• - Tropicalized Metallic Housing with front plastics frame
• - Aluminium front panel with anti-scratch Polyester mask
• - Case with rear mounting bracket "U" type
• - Front panel mounting
• - Keypad with 16 Keys (0÷9,A,B,C,D,*,#).
• - IP-54 standard protection for front display panel
• - Panel name personalization Label Slot
• - 4 Optocoupled Input Lines for direct management of 16 Messages
• - Reading of the 4 Optocoupled input lines through serial line
• - Alphanumeric display options:
  • QTP 16-C2 : LCD display, backlite or not, with 2 lines for 20 characters
  • QTP 16-C4: LCD display, backlite or not, with 4 lines for 20 characters
  • QTP 16-F2 : Fluorescent display with 2 lines for 20 characters
  • QTP 16-F4: Fluorescent display with 4 lines for 20 characters
• - Buzzer programmable as BELL or to sound with keystroke
• - Serial EEPROM up to 2 Kbyte capacity for permanent storage of Set-Up, Messages, key codes, etc.
• - Memorization on EEPROM and visualization of more than 100 Messages, even with auto sliding mode.
• - RS 232, RS 422, RS 485 or Current Loop serial line
• - Communication selectable between Point to Point and Master Slave mode.
• - Local Set Up for communication parameters (Baud Rate, Stop bits, Keyclick, etc.)
• - Internal power supply capable of driving small external loads
• - DC or AC power supply from 5 Vdc to 24 Vac
• - Customized keyboard and program packages

EL 12 The EL 12 module is a complete, low cost, power supply with extremely reduced dimension, that can be used in conjunction with grifo® cards as SDI 02, QTP 12, QTP 16Big, QTP 16, QTP 22, QTP 24, QTP G28, etc.

QTP 16 COMMAND SUMMARIZING TABLE
C O M M A N D	CODE	HEX CODE	MNEMONIC
H O M E	01	01	SOH
CURSOR LEFT	21	15	NACK
CURSOR RIGHT	06	06	ACK
CURSOR DOWN	10	0A	LF
CURSOR UP	26	1A	SUB
CARRIAGE RETURN	13	0D	CR
CR + LF	29	1D	GS
ABSOLUTE CURSOR POSITION with 20H OFFSET	27 89 r c	1B 59 r c	ESC Y ASCII(r) ASCII(c)
BACK SPACE	08	08	BS
CLEAR PAGE	12	0C	FF
CLEAR LINE	25	19	EM
CLEAR END OF LINE	27 75	1B 4B	ESC K
CLEAR END OF PAGE	27 107	1B 6B	ESC k
Cursor OFF	27 80	1B 50	ESC P
Static Cursor ON	27 79	1B 4F	ESC O
Blinking "Block" Cursor	27 81	1B 51	ESC Q
B E E P	07	07	BEL
Reading of Version number	27 86	1B 56	ESC V
Storage Message	27 51	1B 33	ESC 3
Writing of life byte	27 33 78 key	1B 21 4E key	ESC ! N ASCII(key)
Reading of life byte	27 33 110	1B 21 6E	ESC ! n
CHARACTERS SHOW	32 ÷ 255	20 ÷ FF	"space" ÷ ASCII(255)
KEY Configuration	27 55 n.Key cod.	1B 37 n.Kei cod.	ESC 7 ASCII(n.Key) ASCII(cod.)
Keyclick ON without Memorizion	27 53	1B 35	ESC 5
Keyclick OFF without Memorizion	27 54	1B 36	ESC 6
Key-Click ON With Memorization	27 33 53	1B 21 35	ESC ! 5
Key-Click OFF With Memorization	27 33 54	1B 21 36	ESC ! 6
Number Reading of the Last Storsge Message	27 110	1B 6E	ESC n
STORAGE MESSAGE	27 33 67 Message Numner char.0...char.19	1B 21 43 Message Numner	ESC ! ASCII(mess. num.) ASCII(char.0) ... ASCII(char.19)
MESSAGE READING	27 33 69 Message Numner	1B 21 45 Message Numner	ESC ! E ASCII(Message Numner )
MESSAGES VISUALIZATION	27 33 68 Message Numner "n"	1B 21 44 Message Numner "n"	ESC ! D ASCII(Message Numner ) ASCII(n)
MESSAGE VISUALIZATION IN SLIDING MODE	27 33 83 Num. Message "N" n.car.	1B 21 53 Num. Message "N" n.car.	ESC ! S ASCII(Num. Message) ASCII(n.car)
Configuration Optocoupled INPUT	27 33 73 byte	1B 21 49 byte	ESC ! I ASCII(byte )
Reading of Optocoupled INPUT	27 73	1B 49	ESC I

Page up-dated at April 12, 2006

GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALY

Tel: +39 051 892.052 (4 lines)
FAX: +39 051 893.661

Home Cards Categorical Index QTP QTP-Editor QTP-Show            Articles