Windows to I2C Host Adapter

MIIC-201

iPortTM iPort brings I2C directly to your PC. Just plug iPort into your Windows-based PC's serial port, run our I2C Message Manager or Message Center for Windows applications, and you'll be sending and receiving I2C messages in seconds. Master, Slave, Transmit, Receive. iPort supports all I2C message modes including Multi-Master, Arbitration Detection, Repeated Starts, and messages from 1 to 64K bytes in length. Which I2C Adapter is right for me.

PRODUCT HIGHLIGHTS Turn your Windows-based PCs Serial Port into an I2C Port. Get on the I2C Bus in Seconds. Supports Bus Master and Slave, Transmit and Receive. Includes our I2C Message Manager and Message Center Windows Applications. Compatible with 3.3v to 5v I2C at up to 100Kbps. Build your own custom I2C applications with our optional I2C Software Development Kit.

I2C Bus is the Inter-Integrated Circuit serial bus developed by Philips Semiconductor for inter-IC communications. Now, this highly efficient and cost effective communications link is being adopted by leading technology companies worldwide for chip, board, and system level communications.

An I2C Bus network can support up to 127 Master or Slave devices with a 2-wire serial interface. I2C devices can be as simple as RAM, EEPROM, or I/O devices, or have the full-blown processing power of an embedded microcontroller or microprocessor.

If you need to create you own custom I2C applications, our I2C Software Development Kit for Windows provides the tools needed to turn your PC into a active I2C node. This package includes our Dynamic Linked Library with documentation and source code examples in Visual C and Delphi. This kit works with iPort to make developing I2C applications quick and easy.

TYPICAL APPLICATIONS

• Product Development: Software/Hardware Testing and Troubleshooting.
• Manufacturing: Testing and Debugging, EEPROM Programming, Quality Control.
• Field Service: Field diagnosis, Repair service and Verification, Product Updates.

Included Parts List

• iPort Host Adapter.
• Wall Transformer (#MWT-5VA, MWT-5VAE, or MWT-5VAI depending on power configuration selected See below).
• DB-9F to DB-25M Serial Port Adapter Cable, 12 inch.(#C9F25M1)
• 4 Ft. long I2C Interface Cable (iPort I2C Connector Information).(#CAB4)
• iPort I2C Utility Pack for Windows.
• User's Guide.

Power Configuration Options:

Standard (# MIIC-201) European (# MIIC-201E) International (# MIIC-201I)

120VAC 60Hz, USA Plug.(Wall Transformer # MWT-5VA)Ý 220VAC, 50Hz, European Plug.(Wall Transformer # MWT-5VAE)Ý 120/220/240VAC, 50-60Hz International Plug Selection. (Wall Transformer # MWT-5VAI)

Optional Add-On Parts

• I2C Interface Cables 8 and 16 Ft..(#CAB8, or CAB16)
• I2C Prototyping Board (#IP-101).
• 4 Channel I2C Multiplexer Board (#IP-201).
• 7 Port I2C Distribution Board (#IP-202).

Product Environmental Specifications

• Operating Temperature: 10 C to 35 C (50 F to 95 F)
• Storage Temperature: -40 C to 65 C (-40 F to 149 F)
• Operating Relative Humidity: 20% to 80% non-condensing
• Maximum humidity gradient: 10% per hour, operational and non-operational conditions
• Storage Relative Humidity: 5% to 95% non-condensing
• Operating Altitude: -16m to 3,048m (-50 ft to 10,000 ft)
• Storage Altitude: -16m to 10,600m (-50 ft to 35,000 ft)

See our Online Catalog for ordering information.

*I2C is just a mouse click away ^TM

| MCC | | iPort | | iPort/AI | | iPort/AFM | | iPort/USB | | Bus Monitor | | Bus Monitor Plus |

| I2C Bus Ovr. | | LabVIEW | | Sample Prog. | | User's Guides | | FAQ | | iPort FAQ |

Page up-dated at June 04, 2007