MCC - UK - I2C Bus Monitor Plus

I2C Bus Monitor Plus, Version 2

#MIIC-102x

The I2C Bus Monitor PlusÝ is our laboratory grade troubleshooting instrument for the Inter-Integrated Circuit (I2C) Bus, SMBus, and other derived protocols. When connected to an I2C or derived protocol bus and a host computer, the I2C Bus Monitor Plus captures, filters, and displays bus message data and timing information.

PRODUCT HIGHLIGHTS

Microsecond Timestamping of Bits, Bytes and Messages.

Non-intrusive capture of bus traffic to 400KHz.

Software controlled SCL and SDA Logic Voltage Levels.

Display Filtering on message Slave Address, Data Bytes, and Smart Battery System Protocol Violations.

If your designs include heavy I2C Bus, SMBus, or derived protocol content, the I2C Bus Monitor Plus will give you the bus monitoring power you need, including data timestamping, variable logic voltage thresholds, and flexible triggering. Whether you're testing designs with a single master and slave, such as programming configuration EEPROMs, or monitoring multiple masters and slaves in a server maintanence system, the information packed screens help you get your debug and verification done faster.

ADDITIONAL FEATURES

I2C Bus, SMBus, SSI, and IPMI Development Tool.
256K byte Data Recording Memory.
Supports General Calls, and Multi-Master/Multi-Slave Addressing.
Displays Start/Stop Events, Device Addresses, Read/Write Requests, Acknowledgements, Data, and Bit, Byte, and Message timing.
Trigger Input for synchronization with external events.
Trigger Output on bus events or pattern match for triggering external test equipment.

TYPICAL APPLICATIONS

Product Development: Software/Hardware Development, Testing, and Troubleshooting.

Manufacturing: Manufacturing Tests, Inspection, Quality Control.

The I2C Bus Monitor Plus includes an extensive array of message monitoring capabilities, and can time-stamp bits, bytes, or messages.

The I2C Bus Monitor Plus can display Smart Battery Data in engineering units, and can detect, filter, and display protocol violations.

PRODUCT SPECIFICATIONS (Version 2)

PORTS

I2C Bus

A test cable provides connection to the network under test. Test clips are provided for:

SCL Clock Line (with Variable Threshold)
SDA Data Line (with Variable Threshold)
GND Ground Line
Target System VCC (Optional)

Trigger Input (BNC)

TTL signal input to synchronize data collection with external events.

Trigger Output (BNC)

TTL signal output to synchronize external equipment with I2C Bus Start, Stop, Ack, Nack;, and Bit Pattern matching events.

Utility Port (DB-9)

Use to attach optional external equipment in automatic test environments. Signals include:

SDA, SCL Input
SDA, SCL Output (TTL)
Trigger Input, Trigger Output (TTL)

INTERFACE OPTIONS

#MIIC-102/ISA - ISA interface.
#MIIC-102/PCI - PCI interface.
#MIIC-102/PCC - PC Card interface. (Not compatible with NT4.0)

Optional Add-On Interface kits available separately.

#MIIC-102x

CONTROL SOFTWARE

The I2C Bus Monitor Plus includes an extensive array of message monitoring capabilities. These inlcude:

Display Options

I2C Bus Events (Start/Stop, R/W, Ack/Nack)
Bit, Byte, and Message Timing (uS)
Message Bit Rate (Bits/Sec)
Absolute or Relative Time Mesaurement

Protocols Supported

I2C Hex - Displays all data in hexadecimal.
I2C ASCII - Displays data in printable ASCII or hexadecimal.

SBS - Displays Smart Battery System (SBS V1.0, V1.1) data in engineering units with protocol revision selection (Host, Battery, Charger, and Selector) and violation detection.

Message Filtering

Bus activity can be monitored on a selective or non-selective basis. Filter displayed messages on Slave Address, up to 8 Data bytes, and SBS protocol violation only.

SDA/SCL Logic Threshold Control

Software controlled 0.7V to 2.5V.

Software Requirements

32-bit Windows (95/98/2000/ME/NT4.0).

POWER

Includes external Wall Transformer. See below for power configurations.

Power Configuration Options:

Standard (# MIIC-102)

European (# MIIC-102E)

International (# MIIC-102I)

120VAC 60Hz, USA Plug.(Wall Transformer # MWT-5VA)

220VAC, 50Hz, European Plug.(Wall Transformer # MWT-5VAE)

120/220/240VAC, 50-60Hz International Plug Selection. (Wall Transformer # MWT-5VAI)

Included Parts List

1. I2C Bus Monitor Plus External Pod.
2. I2C Bus Monitor Plus Software for Windows 95+, NT4.0+.
3. Computer Interface Card (ISA, PCI, or PC Card).
4. Computer Interface Cable.
5. Interface Card Driver CD. 6. I2C Bus Clip Lead Cable, 2 Ft. (#CABCL).
7. I2C Interface Cables, 4 Ft.,(#CAB4).
8. BNC to Clip Lead Trigger Cable.
9. Wall Transformer (#MWT-5VA, MWT-5VAE, or MWT-5VAI depending on power configuration selected).
10. User's Guide.

Optional Add-On Parts

ISA Interface Kit (#MIIC-102/ISAH).
PCI Interface Kit (#MIIC-102/PCIH).
PC Card Interface Kit (#MIIC-102/PCCH).

Product Environmental Specifications

Operating Temperature: 10 C to 35 C (50 F to 95 F)
Storage Temperature: -40 C to 65 C (-40 F to 149 F)
Operating Relative Humidity: 20% to 80% non-condensing
Maximum humidity gradient: 10% per hour, operational and non-operational conditions
Storage Relative Humidity: 5% to 95% non-condensing
Operating Altitude: -16m to 3,048m (-50 ft to 10,000 ft)
Storage Altitude: -16m to 10,600m (-50 ft to 35,000 ft)

See our Bus Monitor FAQ for answers to your technical questions, or our Online Catalog for ordering information.

Page up-dated at June 04, 2007

Included Parts List
1. I2C Bus Monitor Plus External Pod. 2. I2C Bus Monitor Plus Software for Windows 95+, NT4.0+. 3. Computer Interface Card (ISA, PCI, or PC Card). 4. Computer Interface Cable. 5. Interface Card Driver CD.	6. I2C Bus Clip Lead Cable, 2 Ft. (#CABCL). 7. I2C Interface Cables, 4 Ft.,(#CAB4). 8. BNC to Clip Lead Trigger Cable. 9. Wall Transformer (#MWT-5VA, MWT-5VAE, or MWT-5VAI depending on power configuration selected). 10. User's Guide.