QTP 16P

Quick Terminal Panel - 16 keys; Passive

QTP 16P English Tech. Manual PDF format.

Ver. 5.20 - Rel. 10 February 2005.

QTP 16P - View of the availables models

QTP 16P is a complete low cost IP-52 passive operator panel. (See the Application Note). It haven' t a CPU so QTP 16P is directly driven from TTL I/O lines of an external unit. The driver procedures are inserted at operating system level or at language level in many Abaco® cards. It is possible to drive the QTP 16P with 80 or 51 family cards. The first ones use GDOS or FGDOS romate operating system (GPC® 011, GPC® 15A, GPC® 15R, GPC® 80F, GPC® 81F, GPC® 153, GPC® 183, GPC® 154, GPC® 884, etc.) and the second ones use BAS-52 industrial BASIC (GPC® 552, GPC® 553, GPC® 554, GPC® 323, etc.). The operator panel is specifically designed for industrial use and for direct mounting on automatic machinery. It is, in every respect, video terminals suitable to be the direct interface between operator and machinery in any of the control or comand operations which could be necessary during running or diagnostic of the same. QTP 16P is available with internal power supply capable of driving small external loads. This feature allows in many small applications, costs and spaces optimization because being not necessary to use additional external components. QTP 16P is available with Alphanumeric Fluorescent or LCD displays, backlite or not and with 20 characters for 2 or 4 lines. The QTP 16P affords 16 keys. A label slot can be used to carry a name for the QTP 16P or the user's own logo. The QTP 16P is able to execute an entire range of display commands, including Clear Screen, Position cursor, etc., with code compatibility similar to that of the ADDS ViewPoint video terminal. Features of QTP 16P are as follows:

• - Overall dimension: 96x193mm frontal frame size; 8 mm frontal frame depth; 22 mm rear metallic housing depth
• - Tropicalized metallic housing with front plastics frame
• - Aluminium front panel with anti-scratch polyester mask
• - Case with rear mounting bracket "U" type
• - Front panel mounting
• - Interface with 16 TTL I/O lines (with standard 20 pins Abaco® I/O connector )
• - Keypad with 16 keys
• - IP-54 standard protection for front display panel
• - Panel name personalization label slot
• - Alphanumeric display options:
  • QTP 16P-C2 : LCD display, backlite or not, with 2 lines for 20 characters
  • QTP 16P-C4: LCD display, backlite or not, with 4 lines for 20 characters
  • QTP 16P-F2 : Fluorescent display with 2 lines for 20 characters
  • QTP 16P-F4: Fluorescent display with 4 lines for 20 characters
  • QTP 16P-GF2 : Fluorescent GRAPHIC display with 2 lines for 140 pixel
  • QTP 16P-GF4: Fluorescent GRAPHIC display with 4 lines for 140 pixel
• - Internal power supply capable of driving small external loads
• - DC or AC power supply from 5 Vdc to 24 Vac
• - Customized keyboard and panel

QTP 16P COMMAND SUMMARIZING TABLE
C O M M A N D	CODE	HEX CODE	MNEMONIC
H O M E	01	01	SOH
CURSOR LEFT	21	15	NACK
CURSOR RIGHT	06	06	ACK
CURSOR DOWN	10	0A	LF
CURSOR UP	26	1A	SUB
CARRIAGE RETURN	13	0D	CR
CR + LF	29	1D	GS
ABSOLUTE CURSOR POSITION with 20H OFFSET	27 89 r c	1B 59 r c	ESC Y ASCII(r) ASCII(c)
BACK SPACE	08	08	BS
CLEAR PAGE	12	0C	FF
CLEAR LINE	25	19	EM
CLEAR END OF LINE	27 75	1B 4B	ESC K
CLEAR END OF PAGE	27 107	1B 6B	ESC k
Cursor OFF	27 80	1B 50	ESC P
Static Cursor ON	27 79	1B 4F	ESC O
Blinking Cursor	27 77	1B 4D	ESC M
Blinking "Block" Cursor	27 81	1B 51	ESC Q
Key Configuration	27 55 num. key cod.	1B 37 num. key cod.	ESC 7 ASCII(num. key) ASCII(cod.)

Page up-dated at February 10, 2005

GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALY

Tel: +39 051 892.052 (4 lines)
FAX: +39 051 893.661

Home Cards Categorical Index QTP