SOFTWARE TOOLs

• CPU Atmel AVR
• CPU Microchip PIC
• CPU 68HC05
• CPU 68HC11
• CPU Philips 51XA
• CPU Intel 251
• CPU 8051
• CPU 68.000
• CPU Z80
• CPU 80C188

General Concepts

CPU cards of Abaco® line are grouped according to the type of their microprocessor.

Each µP family can count, at grifo®, on a specific and articulate software developing tool. There are also available, at third parties, additional interesting developing tools that can make wider the user choice.

All cards using the same µP have the same developing tools except very rare exceptions.

grifo® tendency is to offer, for each µP single family, developing environmentals as friendly as possible at the best possible low price. The tendency is to offer high level languages in order to make easy the programmer job and reducing the time necessary for generating users' program.

The possibility of using high level languages gives also the advantage to offer the high performances of Abaco® line to those users not expert in programming and/or who need to manage on their own the control or supervision of the electronics. In particular by using the efficent BASIC Compiler available for the µP family Z80 compatible, anyone can solve any kind of controlling or supervising problems in a very short period of time. In order to make easier the job of generating and upgrading programs, there are some Operative Systems which support evoluted languages in order to help the programmer in solving those little difficulties which concerne the inizialization and the management of the resources of the card.

Hereunder we are listening the different software developping tools which are available at grifo®

Call, FAX or Email us with any additional questions that you may have.

These tools are grouped for CPU family.

Atmel - AVR

It supports GPC® AM4, GMM AM08, GMM AM32 cards

• DDS Tools. - Complete, Low-Cost, software development package including: Cross-Assembler, Monitor, Disassembly, C Compiler, etc.
• ICC-AVR. - Windows, version. ICC-AVR is near, Low-Cost, software development package including ANSI C Compiler for Atmel AVR family of microcontroller.
• BASCOM-AVR. - BASIC Compiler - Complete, Low-Cost, software development package for Atmel AVR. This Compiler is terribly fast and it generates a small quantity of code.

BASCOM-AVR - DEMO [21 July 2003 Rel. 1.11.7.4] - Disk 1 of 4

BASCOM-AVR - DEMO [21 July 2003 Rel. 1.11.7.4] - Disk 2 of 4

BASCOM-AVR - DEMO [21 July 2003 Rel. 1.11.7.4] - Disk 3 of 4

BASCOM-AVR - DEMO [21 July 2003 Rel. 1.11.7.4] - Disk 4 of 4

Microchip - PIC

It supports CAN PIC, GMM 876, GMM 4620 cards

• HCT-PIC. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Available DEMO program.
• HCT-PIC 18. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Available DEMO 18 program.
• MicroCode Studio is a powerful, visual Integrated Development Environment (IDE) with In Circuit Debugging (ICD) capability designed specifically for microEngineering Labs PICBasic Pro compiler. The main editor provides full syntax highlighting of your code with context sensitive keyword help and syntax hints. The code explorer allows you to automatically jump to include files, defines, constants, variables, aliases and modifiers, symbols and labels, that are contained within your source code. Full cut, copy, paste and undo is provided, together with search and replace features.
• The low-cost PicBasic Compiler (PBC) makes it easy to write programs for the fast Microchip PICmicro MCU. PBC converts these programs into hex or binary files that can be programmed directly into a PICmicro microcontroller. The easy-to-use BASIC language makes PICmicro MCU programming available to everyone with its English-like instruction set. No more scary assembly language!
• The PicBasic Pro Compiler (PBP) is the easiest way for you to program the fast and powerful Microchip Technology PICmicro microcontrollers. PicBasic Pro converts your BASIC programs into files that can be programmed directly into a PICmicro MCU.
• A beginner? Worry not. Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming PIC. mikroBASIC converts your BASIC programs into files that can be programmed directly into a PICmicro MCU.
• The easiest way to program PIC micros. Our comprehensive Pascal Compiler provides the power you need with with the simplicity of Windows-Based point and click environment.

MOTOROLA - MC 146805

It supports GPC® 05 card

• MONI 05. - This is a Debugger-Monitor Program resident on EPROM. It can Down-Load a file under Motorola "S" format through the serial line. It offers essential comands for the debugging with similar modalities of Buffalo program of Motorola. This program is supplied with EPROM and its manual.
• TERM-05. - This is a communication and controlling program bewteen GPC® 05 card and one PC IBM compatible in MS/DOS environmental. This program links together to MONI 05. Term 05 allows files transfer operations and communication to GPC® 05 card. It is supplied on MS-DOS floppy disk and user information are on diskette.
• A05. - Is a Cross-Assembler for MC 146805 able to operates on PC IBM compatible under MS-DOS environmental. It is supplied on floppy disk and user manual is on diskette
• DDS Tools. - Complete, Low-Cost, software development package including: Cross-Assembler, Monitor, Disassembly, C Compiler, etc.
• HTC-05. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Once the porting of the Remote-Debugger module is done, this tool allows the user the software debugging directly on the hardware that he is experimenting. This type of specilization of the Remote-Debugger is available from now and it is supplied with all grifo® CPU cards'. This software package is on 3" 1/2 diskettes under MS/DOS format along with user manual. This version supports these following CPUs: 6805, 68HC05, 6305.

MOTOROLA MC 68HC11A1

It supports GPC® 11, GPC® 114 cards

• MONI-11. - This is a Debugger-Monitor Program resident on EPROM. It can Down-Load a file under Motorola S format through the serial line. It offers essential comands for debugging with similar modalities of Motorola Buffalo program . This program is supplied with EPROM and manual.
• NoICE. - DOS based Symbolic Remote Debugger.
• KERMIT-11. - "Real Time" software for GPC®-11, GPC®-113, GPC®-114. It allows to operate in "Multi Task" managing semaphores, messages, mail box and so forth. It is supplied along with some demo programs. This package includes the EPROM, some diskettes under MS-DOS and manual.
• CONTROL-PASCAL. - "Control Pascal" program for GPC®-11, GPC®-113, GPC®-114. It allows to operate in a reduced Integer Pascal in order to face typical control problems. This package includes the EPROM and the manual containing the language features.
• FORTH-11. - FORTH-83 and some additional extensions, are completely implemented on an EPROM. It allows to exploits all 68HC11 features adding the advantages of an efficient and very fast language. The package includes the EPROM and the manual containing the language features.
• BASIC-11. - BASIC Interpreter of Integer type for GPC®-11, GPC®-113, GPC®-114. This package offers and immediate use of the typical BASIC card, even if, because of its low speed it is mainly suitable for those control prolems having medium-long time. Thank to its low cost, this package is very popular among hobbiest. This package includes the EPROM and the manual.
• GET-11. - Complete editor and terminal emulation program for 68HC11 family cards. This program, developed by grifo®, allows the best work conditions when Monitor and BASIC software tools are used; it is supplied with the order of one of these tools and it is personalized with name and general data of the customer. A useful list of pull down menus and the possibility of using mouse, makes program use very comfortable. GET-11 program can be executed both on MS-DOS system and on MACINTOSH computers too, through SOFT-PC program. It is supplied on MS-DOS 3"1/2 floppy disk together with the User manual.
• DDS Tools. - Complete, Low-Cost, software development package including: Cross-Assembler, Monitor, Disassembly, C Compiler, etc.
• ICC11. - Windows, DOS and Linux Version. ICC11 is near, Low-Cost, software development package including ANSI C Compiler for Motorola MC68HC11 family of microcontroller.
• HCT-11. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Once the porting of the Remote-Debugger module is done, this tool allows the user the software debugging directly on the hardware that he is experimenting. This type of specilization of the Remote-Debugger is available from now and it is supplied with all grifo® CPU cards'. This software package is on 3" 1/2 diskettes under MS/DOS format along with user manual. This version supports these following CPUs: 68HC11, 6801, 6303 and 6301.
• CMX-RTX. - Professional Real-Time Multi-Task Operating-System

PHILIPS - 51XA

It supports xxx xxx card

• HCT-51XA. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Once the porting of the Remote-Debugger module is done, this tool allows the user the software debugging directly on the hardware that he is experimenting. This type of specilization of the Remote-Debugger is available from now and it is supplied with all grifo® CPU cards'. Available DEMO program.

INTEL - 251

It supports xxx xxx card

• SYS251. Complete Program Development Systems for the 80C251 microprocessor family
• PASCAL 251. Pascal compilers for the 8051 or 80C251 families

MCS 51 INTEL family

It supports the following cards: GPC®-F2, GPC®-51, GPC®-323, GPC®-324, GPC®-451, IAS-02, GPC®-R63, GPC®-T63, GPC® R168, GPC® T168

80C535 SIEMENS

It supports GPC®-535 card

89Cx51 PHILIPS

It supports the following cards: GPC®-F2, GMM 932, GPC® R63, GPC® T63, GPC® R168, GPC® T168

80C552 PHILIPS

It supports the following cards: GPC®-552, GPC®-553, GPC®-554, GPC® 550

80C320 DALLAS, 89C420 ...C450

It supports the following cards: GPC®-F2D, GPC®-51D, IAS-02D, GPC®-323D, GPC®-324D, GPC® R63, GPC® T63, GPC® R168, GPC® T168

ATMEL 89Cx51 family

It supports the following cards: GPC®-F2, GPC®-51, GPC®-323, GPC®-324, IAS-02, GPC®-R63, GPC®-T63, GPC®-R94, GPC®-T94, GPC® R168, GPC® T168, CAN GM Zero, CAN GM1, CAN GM2, GMM AC2, GMM 5115

• GET-51. - Complete editor and terminal emulation program for 51 family cards. This program, developed by grifo®, allows the best work conditions when MD/P and BASIC software tools are used; it is supplied with the order of one of these tools and it is personalized with name and general data of the customer. A useful list of pull down menus and the possibility of using mouse, makes program use very comfortable. GET-51 program can be executed both on MS-DOS system and on MACINTOSH computers too, through SOFT-PC program. It is supplied on MS-DOS 3"1/2 floppy disk together with the User manual.
• MD/P xxx. - It is a Monitor Debug Program able to down load an HEX Intel file through the serial line, and debugging and executing the loaded program directly on the target card. With MD/P commands it is possible to do as follows: dumping internal and external memory contents, modifying memory, examining and changing microprocessor registers, filling and moving memory segments, executing program in step to step mode, setting breakpoint, executing program at real speed, etc. It works together with GET 51 program that allows all described commands execution. It is supplied on EPROM with its User manual and GET 51 program.
• NoICE. - DOS based Symbolic Remote Debugger.
• MO52. - It is a Monitor Debug Program able to down load an HEX Intel file through the serial line, and debugging and executing the loaded program directly on the target card. With MO52 commands it is possible to do as follows: dumping internal and external memory contents, modifying memory, examining and changing microprocessor registers, filling and moving memory segments, executing program in step to step mode, setting breakpoint, executing program at real speed, etc. It works together with GET 51 program that allows all described commands execution. It is supplied on EPROM with its User manual and GET 51 program.
• FMO52. - It is really similar to MO52, but it can program and erase the on board FLASH EPROM with the application program developed from the User.
• BASCOM LT. - BASIC Compiler - Complete, Low-Cost, software development package for 89C4051 and for 51 family microprocessor. This Compiler is terribly fast and it generates a small quantity of code.
• BASCOM-8051© , is a Windows BASIC COMPILER for the 8051 family.
  It is designed to run on W95/NT and has all the features of BASCOM-LT.
  In addition it has full support for arrays and the single floating point type.
• BXC-51. - BASIC Compiler for MCS 52 BASIC INTEL interpreter. It converts a source file for BASIC interpreter in a source file with 51 assembly code, or in object code file compatible with all 51 family microprocessors. BXC 51 is supplied on MS-DOS floppy disks, with User manual; a set of libraries for each 51 family cards is available too. The advantage of this compiler are:
  • - program execution speed increase, in fact the program is compiled and not interpreted
  • - the obtained compiled code can be executed on other microprocessor different from 8052 AH BASIC (masked Chip by Intel). This reduce the system cost and make possible the use of completely different microprocessors, like 80C552, with clock frequency much more higher than those originally used by BASIC.
  • - possibility to change the source assembly code, to perform any kind of specific modifications and additions.
• BXC-51LT. - This software package includes the Library Toolkit of BXC 51 Compiler. These utilities can be used to access directly the library procedures of BXC-51 compiler, even by generic assembly program. The Programmer can add only the used parts of library excluding the unnecessary code, obtaining a reduced code size. This library procedure selection can be done also on BXC 51 output file, even reducing code size of BASIC programs. The advantage of code size reduction is the possibility to use microprocessor with small internal EPROM. It is supplied on MS-DOS floppy disk and manual.
• BAS-51; BAS-F2; BAS-IAS; BAS-323/32; BAS-324/32. - Interpreted BASIC language compatible with microprocessor 8052 AH BASIC, with the corrections of some errors in floating point procedure. It operates on GPC® 51 family cards with 80C32 microprocessor. It is supplied on EPROM (that must be mounted on the card), along with GET-51 program, no manual.
• BAS-51D; BAS-F2D; BAS-IASD; BAS-323/320; BAS-324/320. - Interpreted BASIC language compatible with microprocessor 8052 AH BASIC, with the corrections of some errors in floating point procedure. Some instructions and commands have been added to original MCS BASIC (i.e clear and program command for EEPROM instead of EPROM programming, second RS 232 line management, etc.). It operates on GPC® 51 family cards with DALLAS 80C320 microprocessor at a twice faster frequency clock than Intel version. With this software tools the same interpreted BASIC program is executed six time faster. It is supplied on EPROM (that must be mounted on the card), with GET-51 program, no manual but documentation on the BASIC language modification. For BASIC language description the user can apply to Intel original documentation. For using BAS-51D ... etc. together with BXC-51, at the moment of the purchase of BASIC compiler also specialization libraries and some useful examples are supplied.
• BAS-552; BAS-553; BAS-554. - Interpreted BASIC language compatible with microprocessor 8052 AH BASIC, with some errors in floating point procedure corrected. Some instructions and commands have been added to original MCS BASIC (i.e clear and program command for EEPROM instead of EPROM programming, LCD Display management, Matrix Keyboard acquisition, A/D Converter management, etc.). It operates on GPC® 552; GPC®-553; GPC®-554 card at a two time faster frequency clock than Intel version, obtaining very good performances. It is supplied on EPROM that must be mounted on the card, together with GET-51 program, without manual but with documentation on the BASIC language modification. For BASIC language description the user can apply to Intel original documentation. For using BAS-55x together with BXC-51, at the moment of the purchase of BASIC compiler also specialization libraries and some useful examples are supplied.
• µC/51 , is a Windows C COMPILER for the 8051 family. It is designed to run on W95/NT. In addition it has full support for arrays and the single floating point type.
• DDS Tools. - Complete, Low-Cost, software development package including: Cross-Assembler, Monitor, Disassembly, C Compiler, etc.
• KSC System. Complete Program development systems for the 8051 microprocessor microprocessor family
• PASCAL Compiler. Pascal compilers for the 8051 or 80C251 families
• CMX-RTX. - Professional Real-Time Multi-Task Operating-System
• HCT-51. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code Optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Once the porting of the Remote-Debugger module is done, this tool allows the user the software debugging directly on the hardware that he is experimenting. This type of specilization of the Remote-Debugger its available from now ant it is supplied with all grifo® CPU cards'. This software package is on 3" 1/2 diskettes under MS-DOS format along with user manual. This version supports these following CPUs: 8051, 8052, 80C51, 80C52, 80C31, 80C32, 80C320, 80C451, 80C552, 80C750, 80C751, 80C752, 80C2051, 80C517.

MOTOROLA MC 68HC000

It supports GPC® 68 card

• KAT-CE. - It is a complete low price software tools for GPC® 68. This software includes a GET-68; MON-68 and PASCAL-68.
• MON-68K. - It is a complete low price software tools for GPC® 68, that must be used together with TERM 68 program. This software includes a full screen editor, two step assembler and monitor debugger that allow a fast and easy code generation. It is supplied on EPROM with manual; the MON 68K messages are shown in Inglish language.
• TERM-68. - It is a communication program that must be linked with MON 68K and PASCAL-68 software tools. It is supplied on MS-DOS floppy disk.
• PASCAL-68. - It is a PASCAL compiler for GPC® 68 card, with features similar to release 3.0 of Borland Turbo PASCAL. For a correct use it needs the MON 68K and TERM 68 software tools. It is supplied on EPROM with manual; the PASCAL 68 messages are shown in Inglish language.
• RUN-P68. - It is a run time module that must be used to save the compiled object code generated from PASCAL 68 in EPROMs for GPC® 68. It is supplied on EPROM.
• GET-68. - Complete editor and terminal emulation program for 68K family cards. This program, developed by grifo®, allows the best work conditions when MON-68K and PASCAL-68 software tools are used; it is supplied with the order of one of these tools and it is personalized with name and general data of the customer. A useful list of pull down menus and the possibility of using mouse, makes program use very comfortable. GET-68 program can be executed both on MS-DOS system and on MACINTOSH computers too, through SOFT-PC program. It is supplied on MS-DOS 3"1/2 floppy disk together with the User manual.
• HCT-68. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Once the porting of the Remote-Debugger module is done, this tool allows the user the software debugging directly on the hardware that he is experimenting. This type of specilization of the Remote-Debugger its available from now ant it is supplied with all grifo® CPU cards'. This software package is on 3" 1/2 diskettes under MS-DOS format along with user manual. This version supports these following CPUs: 6800, 68010, 68020, 68030, 68070, 68302, 68306, 68332, 68340.
• CMX-RTX. - Professional Real-Time Multi-Task Operating-System.

TOSHIBA 84C011

Supports the GPC® 011 card

ZILOG Z80 family

It supports the following cards: GPC®-15A, GPC®-15R, GPC®-80F, GPC®-81F, GPC®-153, GPC®-154, GPC®-150, GPC®-180, GPC®-183, GPC®-184, MDU-RKD, RKD-LT

HITACHI HD64C180

It supports the following cards: GPC® 180, GPC® 183, GPC® 184, MDU-RKD, RKD-LT

• GET-80. - It is a complete program with Editor, Communication driver, and Mass Memory management for all Z80 family cards. This program, developed by grifo®, allows to operate in the best conditions when GDOS, FGDOS or xGDOS MCI software tools are used; GET 80 is supplied when one of these tools is ordered and it is personalized with name and general data of the customer. A useful list of pull down menus and the possibility of using mouse, make program use very comfortable. GET 80 program can be executed both on MS-DOS system and on MACINTOSH computers too, through SOFT-PC program. It is supplied on MS-DOS 3"1/2 floppy disk with the documentation on GDOS 80 manual.
• NoICE. - DOS based Symbolic Remote Debugger.
• GDOS xxx. - It is a complete development Tool for all Z80 family card. It is supplied together with GET-80 program to allow an easy and immediate use of this powerful development system. GDOS is divided in two different structures : the first one works on PC maintaining serial communication with the second one. The second structure is on EPROM, it works on board of the card and it is an efficient operating system that executes many low level functions and, at the same time, it allows high level language use. The combination of the said structures results in a complete machine, in fact the card uses PC resources (like floppy disk, hard disk, printer, keyboard, monitor, etc.) as its own peripheral devices. This resulting "virtual machine" performs operation in a transparent way for the User, so this latter can operate with the same modality of standard PC languages. It is really interesting the compatibility of GDOS with all CP/M program and languages; so, if the User has experience, knowledge or developed applications with CP/M, he can use immediately GDOS, without any changes. Moreover, GDOS can manage all memory devices exceeding 64K Bytes as RAM-Disk and ROM-Disk. The on board RAM devices (often backed by battery) can directly be used performing data read and write operations with the confortable file formats. This software tools is supplied on EPROM with MS-DOS GET-80 floppy disk, some example, utility and the operating system documentation.
• FGDOS xxx. - It is really similar to GDOS, but it can program and erase the on board FLASH EPROM with the application program developed from the User. In this way the external EPROM programmer is not necessary to store definitely the program and it is possible to modify or to add code directly on the installed machine, through a portable PC. This software tools is supplied on FLASH EPROM with MS-DOS GET-80 floppy disk, some example, utility and the operating system documentation.
• GDOS-MCI xxx; FGDOS-MCI xxx. - It is a version of GDOS or FGDOS sofware tools, capable of PCMCIA Memory Card management. Using MCI 64 card, the GDOS operating system manages memory cards as RAM-Disk or ROM-Disk. All applications with data acquisition and data logging can be realized with high level languages that manage data on files, with a fast development time and without any software complication. This software tool is supplied on EPROM or FLASH EPROM with MS-DOS GET-80 floppy disk, some examples, utility and the operating system documentation.
• RSD xxx. - This software tools is a Remote Symbolic Debugger with two operating mode. The first one is a monitor debugger modality with software emulation on P.C.; the second is a remote monitor debugger modality that execute code directly on the card. Trough serial communication the User can: down load an HEX file and associated symbol table, debug code in symbolic mode, execute code in step to step mode or in real time mode, set breakpoint, dump and modify memory and registers, etc. RSD software tool supports both Z80 and Z180 instrunction sets. Really interesting is the program execution management, in fact many hardware and software breakpoint are supported. RSD can be used together with assembler tools, like MAL-80, and C Compiler CCC-80. It is supplied on EPROM and on MS-DOS floppy disk with technical manual.
• MAL-80. - It is a Macro Cross Assemler that operates on any PC with MS-DOS operating system. It supports both Z80 and Z180 instruction sets. The generated code can be debugged on PC, through software simulation, or directly on target card, through remote modality, using RSD software tools. MAL-80 is compatible with C Compiler CCC-80 of which it assemble the compilation result. It is supplied on MS-DOS floppy disk with technical manual.
• CCC-80. - It is a complete C Compiler with ANSI/ISO standard, provided of floating point procedure, that can generate code for Z80 and Z180 family microprocessors. It works together with cross assembler MAL-80 and Symbolic Debugger RSD. It is supplied on MS-DOS floppy disk with technical manual.
• CBZ-80. - It is a BASIC Compiler that generates a really compact and fast code. It must work together with any GDOS version and it can exceed the 64K memory limits of Z80 family microprocessors through CHAIN modality. More than one application program can be saved in RAM and/or ROM-Disks and subsequently executed. In conjunctionto the powerful GET-80 Editor the CBZ-80 program becomes a confortable and really efficient developing system for any kind of application program. This program is supplied as ROM DISK file in GDOS EPROM or FLASH EPROM and on MS-DOS floppy disk with some example and manual.
• DDS Tools. - Complete, Low-Cost, software development package including: Cross-Assembler, Monitor, Disassembly, C Compiler, etc.
• PASCAL-80. - It is an efficient and complete PASCAL Compiler for Z80 family cards, with features similar to Release 3.0 of Borland Turbo PASCAL. It must work together with any GDOS version and it can exceed the 64K memory limits of Z80 family microprocessors through OVERLAY modality. More than one application program can be saved in RAM and/or ROM disks and subsequently executed. The terminal emulation of GET-80 program support the typical full screen PASCAL Editor, including the attributes management. This program is supplied as ROM DISK file in GDOS EPROM or FLASH EPROM and on MS-DOS floppy disk with some example and manual.
• CMX-RTX. - Professional Real-Time Multi-Task Operating-System
  
• HCT-80. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Once the porting of the Remote-Debugger module is done, this tool allows the user the software debugging directly on the hardware that he is experimenting. This type of specilization of the Remote-Debugger its available from now ant it is supplied with all grifo® CPU cards'. This software package is on 3" 1/2 diskettes under MS-DOS format along with user manual. This version supports these following CPUs: Z80, Z180, 84C011, 84C11, 84C013, 80C13, 84C015, 84C15, 64180, NCS800, Z181, Z182.

INTEL 86 family

It supports the following cards: GPC® 188, GPC® 188D, GPC® 188F, GPC® 884

• MON-86. - It is a complete software tools that includes a Romed Operating System and a Monitor program. With this monitor the developed application program can be down Loaded and Debugged with modality similar to MS-DOS Debug program. It works together with TERM-86 program through a serial line connection. It is supplied on EPROM with technical documentation.
• TERM-86. - It is a communication program that must be used together with MON 86 software tools. It allows communication between GPC® 188 family cards and P.C. performing bidirectional files transfer. TERM 86 is supplied on MS-DOS floppy disk.
• PASCAL-188. - It is an efficient and complete PASCAL Compiler capables of Romed code creation. It has syntax features and instruction set similar to Release 3.0 of Borland Turbo PASCAL and the user can refers to documentation of this software package. PASCAL-86 generates a very compact code that is saved and executed directly in EPROM and that requires very few RAM space. This program is supplied on EPROM and needs of MON-86 and TERM-86 programs to work correctly.
• GET-188. - Complete editor and terminal emulation program for 80C188 family cards. This program, developed by grifo®, allows the best work conditions when MON-86 and PASCAL-86 software tools are used; it is supplied with the order of one of these tools and it is personalized with name and general data of the customer. A useful list of pull down menus and the possibility of using mouse, makes program use very comfortable. GET-188 program can be executed both on MS-DOS system and on MACINTOSH computers too, through SOFT-PC program. It is supplied on MS-DOS 3"1/2 floppy disk together with the User manual.
• DDS Tools. - Complete, Low-Cost, software development package including: Cross-Assembler, Monitor, Disassembly, C Compiler, etc.
• GCTR. - It is a powerful software development tools for GPC® 188 family cards, that allows application program development through Borland C Compiler on standard P.C. A really powerful Remote Symbolic Debugger works on GPC® 188 family cards in the same manner of an In-Circuit Emulator with the confort of symbol use. At the end of the debugging phase the developed program can be saved on EPROM, with a limited RAM memory use. GCTR is supplied on EPROM, with a set of MS-DOS floppy disks and technical documentation.
• CMX-RTX. - Professional Real-Time Multi-Task Operating-System
• HCT-86. - Professional C Cross Compiler of Hi-Tech Software Inc. This Compiler is terribly fast and it generates a small quantity of code. This result is due to advanced techniques in optimizing the generated code based on Artificial Intelligence techniques which allow to get a very compact and very fast code. The package includes: IDE, Compiler, Code optimizer, Assembler, Linker, Remote Debugger and so on. This tool is Full ANSI/ISO Standard and Full Library Source Code. Once the porting of the Remote-Debugger module is done, this tool allows the user the software debugging directly on the hardware that he is experimenting. This type of specilization of the Remote-Debugger its available from now ant it is supplied with all grifo® CPU cards'. This software package is on 3" 1/2 diskettes under MS-DOS format along with user manual. This version supports these following CPUs: 8088, 8086, 80188, 80C188, 80186, 80C186, 80286, V20, V30, V25

Last Up-dated at February 20, 2008

Home Examples Languages Utility