QTP 12/R246
Quick Terminal Panel -
12 keys - 24 Opto-In, 16 Relay
QTP 12/R246 is essentially a CPU module provided
with inputs, outputs and operator interface. It
contains a complete controller capable to manage completely a
specific application in a minimun
size.
CPU section features 32K FLASH with ISP interface for programming through
serial line.
The on board CPU is a 8051 Core so it can be
programmed using several languages including the
convenient BASIC BASCOM 8051; the efficient µC/51
C Compiler or the LadderWORK..
Features of QTP 12/R246 are as follows:
- - Overall dimension: 72x144 mm frontal frame size;
8 mm frontal frame depth; 45 mm rear metallic housing
depth
- - Aluminium Housing et front plastics frame
- - Front panel with Keyboard anti-scratch Polyester mask
- - Case with rear mounting bracket type
- - Front panel mounting
- - 24 NPN or PNP Optocoupled Input
- - Inputs can be connected directly to counter signals
- - 16 5A Relay outputs
- - Keypad with 12 Keys (0÷9, *, #).
- - IP-54 standard protection for front display panel
- - Panel name, and LED indicator, personalization Label
Slot
- - LED indicator driving through serial line
- - 3 Display options:
- QTP 12-C2/R246 : LCD
display, backlite or not, with 2 lines for 20 characters
- QTP 12-F2/R246 : Fluorescent
display with 2 lines for 20 characters
- QTP 12-GF2/R246: Graphic
Fluorescent display with 140 x 16 pixel
- - Buzzer programmable as BELL or to sound with
keystroke
- - Serial EEPROM for permanent storage of Set-Up,
Messages, key codes, etc.
- - Memorization on EEPROM and visualization of more
than 100 Messages, even with auto sliding mode.
- - RS 232, RS 422, RS 485 or Current Loop serial line
- - CAN optional serial
line
- - Communication selectable between Point to Point
and Master Slave mode.
- - Local Set Up for communication parameters (Baud
Rate, Stop bits, Keyclick, etc.)
- - On-board protection aganist voltage peaks by TransZorb
- - DC or AC power supply from 12 Vdc to 24 Vac
- - Customized keyboard and program packages
- Wide range of developement software such as: Monitor
Debugger, Assembler,
GET-51
and BASIC Interpreter,
BXC51, BASIC
Compiler, FORTH, C
Compiler, HTC-51,
BASCOM, BASCOM-8051,
MO52, FMO52,
FMO52, LadderWORK,
CMX-RTX,
Soft-ICE, DDS,
PLM 51, etc. No development system is required in order
to operate; it is sufficent the card and a software tool: i.e
BASIC
and the connection through the serial line to any PC using
our GET-51:
nothing more.
EXPS 2
The EXPS 2 module is a complete, low cost,
switching power supply with extremely reduced dimension, that
can be used in conjunction with grifo®
cards as GPC® R94, GPC® T94, GPC® R63, GPC®
T63, GPC® R168, GPC® T168, QTP 12/R84, etc.
BASCOM-8051
W95/NT 8051-BASIC Compiler
BASCOM-8051© is a Windows BASIC
COMPILER for the 8051 family It is designed to run
on W95/NT and has all the features of BASCOM
LT. In addition it has full support for arrays and the single
floating point type.
µ C /
5 1
ANSI C Compiler
for 8051
Develop high quality software for any 8051 in ANSI
C. µC/51 comes
with an incredible optimizing compiler, you can even write software
in ANSI C on 8051's with 1kB of code memory!
µC/51 is absolutely complete: user friendly multi
file Editor, Compiler, Assembler, Downloader, Source
Level Debugger. You will not need anything else.
LadderWORK
The LadderWORK
Integrated Development Enviroment (IDE)
The picture below, represents the apperance of the program
LadderWORK
on your computer. LadderWORK has an integrated enviroment feature,
allowing you to draw schematics, compile programs and upload code
to PLC always working on the same window. The integrated enviroments
are composed by several parts described below.
Data Sheet QTP 12/R246,
Rel. 02.02
GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALY
Tel: +39 051 892.052 (4 lines)
FAX: +39 051 893.661
Home 
Cards 
Categorical Index CPU Table