ERASERs

STROBE ERASER

New chips for old - in seconds: Strobe Eraser

Wipe your EPROMs clean quickly and safely with the Dataman Strobe Eraser. Typical erase time is between 10 and 30 seconds. Use the Dataman Strobe Eraser with EPROMs in-circuit or in the anti-static safety tray provided.

• Confortable pistol-grip design
• Lighyweight, all-plastic casing
• Press-and-hold action
• Stroboscopic principle of operation
• Xenon tube supplies UV light at optimum wavelength (253.7nm)
• Long-life: up to 10.000 erasures from a single tube
• AC operated (220-240Vac only)

CHIPRASE

Handy EPROM Eraser

The first professional UV EPROM eraser that lets you erase so many IC's in such a smoll space.

FEATURE:

• Ligth weight, space saving, and durable plastic body design.
• Electronic Timer adjusts UV exposure from 10 to 60 minutes.
• Two layer design utilizes the top and bottom areas of the UV tube:
• Top layer capacity: Up to 8 pieces of 32 pin ICs.
• Botton layer capacity: Up to 9 pieces of 40 pin DIP ICs.
• Automatic UV shut off switches protect user from UV exposure when opening the top cover or botton drawer.
• Anti static sponge surface provide ICs with protection from static pentatration.
• Power-on LED indicators

ER-05

EPROM Eraser ER-05

• 5 EPROM
• Timer
• Power supply
• Small dimensions
• Low-Cost

Page up-dated at March 11, 2008

GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALY

Tel: +39 051 892.052 (4 lines)
FAX: +39 051 893.661

Home Programmers Cat. Index