E P - 3 2 +

Low price EPROM, FLASH EPROM, etc. programmer

EP 32+ English Tech. Manual PDF format.

Ver. 3.00 - Rel. 13 May 2005.

Programs the EPROM, EEPROM, FLASH EPROM and serial EEPROM
Programming more than 8.575 circuits (at December 2007)
High programming speed
Connection to PC through parallel (printer) port
Comfortable control program
Free SW update, download from Internet
Small dimensions
Power supply, cable and SW included

EP-32+ is a small and powerful EPROM, EEPROM, Flash EPROM and serial EEPROM programmer and static RAM tester, designed for professional mobile applications. Generators for supply voltage and programming voltage are digitally controlled and level of H can be limited, therefore programmer can work with 'true LV' device too - from 2V. Performance, dimensions and speed of EP-32+ can be used both in maintenance and in production.

EP-32+ interfaces with standard Personal Computers, AT to Pentium, portable or desktop model. Programmers allows you to directly connect to your PC through any standard parallel (printer) port - no special interface card is needed.

A programming verification is performed by the programmer at the marginal level of VCCP, which, obviously, improves programming yield, and guarantees long data retention.

The advantage of EP-32+ is its easy to use comfortable software with pull down menu, hot keys and on line help. You can select device by classes, by manufacturers or simply type device vendor's name and part number. The standard device operation functions (read, blank check, program, verify) have been completed with some test functions (illegal bit test, insertion test). The program facilitates the use of the buffer and files, including automatic file format detection and conversion.

The Autoincrement function of EP-32+ enables to assign individual serial numbers to each programmed device. This function simply increments a serial number in the buffer each time a new device is inserted. Furthermore, the function enables an operator to read serial numbers and/or any programmed device identification from a file.

A customer that bought the programmer, can use the following support services:

Internet update service means, that grifo® mantain the latest version of programmer software on the web page, below reported. An Internet update service is your hassle free guarantee that you are doing the highest quality programming on grifo® programmers, at no additional cost.
AlgOR (Algorithm On Request) service give to the user tool, with which can influence on amount and types programmed devices as need.
Telephone assistance service allows the user in trouble to speak with a grifo® technician and to solve the problems through the obtained on line help.

The EP-32+ can use DIL to PLCC, SOIC, PSOP, TSSOP and TSOP Socket Converters that allows the management of new low dimension surface mounting devices.

EP 32+ Program - FREE - Update

Please download and execute free management program. It allows You to check if the requested device is supported by programmer. Be sure that the selected programmer is the EP 32+.
Software for Windows 3.x; Windows 95; Windows 98; Win ME; Windows 2000/ Win XP; 2003; XPx64; Vista.

Specification

Socket, pin driver, DAC

32 pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 32 pin
two D/A converters for VCCP and VPP, with controllable rise/fall time and current limitation
TTL driver provides H, L and read for all 32 pins

Device support

Programmer

EPROM: NMOS/CMOS, 27xxx and 27Cxxx with 8 bit data width, full support for LV series
EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx with 8 bit data width
Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, from 256Kbit to 32Mbit, with 8 bit data width, full support for LV series
Serial E(E)PROM: 17Cxxx*, 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx, 93Cxxx, MDAxxx* series, full support for LV series
NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series

For further information please download the management Program, that can be used also without the programmer, and try to select the required devices.

I.C. Tester

static RAM: 6116 .. 624000

Programming speed

M27C010: program and verify -> 42 seconds
AT29C040A: program and verify -> 45 seconds
AM29C040: program and verify -> 102 seconds
P25P020: program and verify -> 130seconds

Conditions: P4, 2.4 GHz, ECP, Windows XP.

Device operations

standard:
- automatic ID-based selection of EPROM/Flash EPROM
- blank check
- read
- program
- verify
- erase
- configuration and security bit program
- illegal bit test
security:
- ID byte check
special:
- auto device serial number increment

Buffer operations

view/edit, find/replace
fill/copy, move, byte swap, word/dword split
checksum (byte, word)
print

Supported file formats

unformatted (raw) binary
HEX: Intel, Intel EXT, Motorola S, MOS, Exormax, Tektronix, ASCII-SPACE-HEX

PC system requirements

processor: from Pentium 166 MHz
free 32 MB of RAM
one CD ROM drive
hard disk with 40 MB free space
operating system: Windows 3.x; Windows 95, 98 or ME
free parallel port for printer connection; IEEE 1284 compatible (ECP/EPP)

General

operating voltage 12... 15 Vdc/max. 500mA (adapter 230 Vac/12 Vdc included in package)
power consumption 6W max.
dimensions 137x65x40 mm (6.3x4.3x2.0 inch)
weight (without external adapter) ca. 650g
temperature from 5°C ÷ 40°C (41°F ÷ 104°F)
humidity from 20% to 80%, non condensing

Package included

EP-32+ programmer
1.3m (4.3 ft.) connecting cable EP-32+ to PC
wall plug adapter 230 Vac, 50 Hz to 12 Vdc
user manual (English and Italian version) on PDF format for Acrobat
CD with software
transport package

Additional services

internet update service let the user download the latest version of programmer software from internet;
algOR (Algorithm On Request) service give to the user tool, with which can influence on amount and types programmed devices as need;
telephone assistance service allows the user in trouble to speak with a grifo® technician and to solve the problems through the obtained telephone help.

Page up-dated at January 24, 2008

GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALY

Tel: +39 051 892.052 (4 lines)
FAX: +39 051 893.661

Home Programmers Zoccoli Socket Conv. Convertitori Converters