GPC® R63 English Tech.
Manual PDF format.
Ver.5.00 - Rel.. 19 March 1999.
The GPC® R63 card, belonging to the CPU M
Type with 22,5x82x90 mm overall dimension is a
powerfull control module with a low cost, ables to work in an
autonomous way as intelligent peripheric and/or remoted in a more
wider telecontrol and/or aquisition net.
The GPC® R63 is supplied with a plastic holder equipped
with hooks for the Omega Rail DIN 46277-1 and DIN 46277-3
types. Thanks to the low cost of this CPU serie, it
is possible to successfully solve, also all those small automation
problems, which have a limited cost budget. Using the wide range
of developing softwar tools, available for the GPC® R63
such as the BASCOM 8051
or the Intel MCS BASIC 52,
and so on, it is possible to complete the applications in a very
short time and with minimum investments. For who wants to program
in C there is the very good and cheap µC/51
or, those used to work with contact logic, can use the LADDER WORK
environment.
The GPC® R63 is also available already programmed with
telecontrol program. In this case, thanks to ALB
( ABACO® Link
BUS ) comunication protocol,
it can be used like an intelligent peripheric, alone or in net
by a standard serial line; so even applications with limited number
of I/O, could be easily driven by any system provided of
a serial line, as a standard PC.
The card is provided of comfortable connector that simplify the
connection with field signals, with no requirements of further
modules and further cost. Moreover these connectors reduces times
when possible up date and assistance phases must be performed.
|
|
The EXPS 2 module is a complete, low cost, switching power supply with extremely reduced dimension, that can be used in conjunction with grifo® cards as GPC® R94, GPC® T94, GPC® R63, GPC® T63, GPC® R168, GPC® T168, QTP 12/R84, etc. |
|
A C C E S S O R I E S |
|
|
|
Connector KIT Set, 8 pins 8 Female pins + AMP plastic housing for QTP_03, etc.. |
|
|
AMP Cable Connector, 8 pins 1 m cable with 8 pins female AMP connector for QTP_03, etc.. |
MSI O1
Modul for Serial Interface
Serial Interface Modul MSI 01.
Available for RS 232: RS 422; RS 485; Current Loop.
BASCOM-8051© is a Windows BASIC COMPILER for the 8051 family It is designed to run on W95/NT and has all the features of BASCOM LT. In addition it has full support for arrays and the single floating point type.
µ C / 5 1
ANSI C Compiler for 8051
Develop high quality software for any 8051 in ANSI
C. µC/51
comes with an incredible optimizing compiler, you can even write
software in ANSI C on 8051's with 1kB of
code memory! µC/51 is absolutely complete: user friendly
multi file Editor, Compiler, Assembler, Downloader, Source
Level Debugger. You will not need anything else.
PASCAL 51
Pascal compiler for 8051
The Pascal 51 is a compiler capable to generate code for the I51 family of microcontrollers, that use almost all the instructions defined in Wirth's Pascal. Thanks to his integarted developmen environment it is really simple to use and offers advantages in hardware resources management, available in the microcontrollers. Moreover objects and precompiled units can be used too.
LadderWORK
The LadderWORK Integrated Development Enviroment (IDE)
The picture below, represents the apperance of the program LadderWORK on your computer. LadderWORK has an integrated enviroment feature, allowing you to draw schematics, compile programs and upload code to PLC always working on the same window. The integrated enviroments are composed by several parts described below.
Data Sheet GPC® R63, Rel. 03.1
