It Doesn't Need Programmer.

Just the Serial Line.

grifo® Mini Modules - 8051 CORE

GMM ACB Zero

grifo® Mini Module AT89C51CC03

This grifo® Mini Module has a 40 pin connector and it is based on Atmel AT89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 64K RAM External Addressing; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 34 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LED; configuration dip switch; etc.

GMM MSC1210

grifo® Mini Module MSC1210

grifo® Mini Module has a 40 pin connector and it is based on Burr-Brown MSC1210 CPU with 32K FLASH; 1,2K RAM; 2K FLASH for Bootloader; 64K RAM External Addressing; 32K FLASH/EPROM External Addressing; RTC by Lithium battery + 64Kb FRAM; 3 Timer Counter; PWM 16 bit; I2C BUS; Master/Slave SPI Serial Interface; 29 TTL I/O lines; 7/8 A/D 24 bit; 2 RS 232 or TTL; 2 status LED; configuration jumper; etc.

GMM ACB

grifo® Mini Module AT89C51AC2

This grifo® Mini Module has a 40 pin connector and it is based on Atmel AT89C51AC2 CPU with 32K FLASH; 256 Byte RAM;1K ERAM; 2K FLASH for Bootloader; 2K EEPROM; 64K RAM External Addressing; 32K FLASH/EPROM External Addressing; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 34 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; 2 status LED; configuration dip switch; etc.

GMM F346

grifo® Mini Module C8051F346

grifo® Mini Module has a 28 pin connector and it is based on Silicon Laboratories C8051F346 CPU with 64K FLASH; 4352 Byte RAM; 1K USB FIFO; ICE-Chips; RTC + 64Kb FRAM; I2C BUS; 4 Timer Counter; 23 TTL I/O lines; 21 A/D 10 bit; Comparator; Built-in Temperature sensor; RS 232 or TTL; USB; 1 status LED; configuration jumper; etc.

GMM 518 Zero

grifo® Mini Module AT89C51CC03

This grifo® Mini Module has a 28 pin connector and it is based on Atmel AT89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 24 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 1 status LED; configuration jumper; etc.

GMM 518

grifo® Mini Module AT89C51AC2

This grifo® Mini Module has a 28 pin connector and it is based on Atmel AT89C51AC2 CPU with 32K FLASH; 256 Byte RAM;1K ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 24 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; 1 status LED; configuration jumper; etc.

GMM 5115

grifo® Mini Module T89C5115

grifo® Mini Module has a 28 pin connector and it is based on Atmel T89C5115 CPU with 16K FLASH; 256 Byte RAM; 256 Bytes ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels (for PWM, compare, capture); 20 TTL I/O lines; 6 A/D 10 bit; RS 232 or TTL; 1 status LED; configuration dip switch; etc.

FREE OF CHARGE

Theoretical/Practical Course on

BASCOM 8051

grifo® Mini Modules - AVR CORE

 

 GMM AM128

grifo® Mini Module ATmega128L

grifo® Mini Module has a 40 pin connector and it is based on Atmel ATmega128L CPU witch 128K FLASH; 4K SRAM; 4K EEPROM; 3 Timer Counter; 7 PWM; 5 A/D; 1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; Master/Slave SPI Serial Interface; JTAG Interface; 36 TTL I/O lines; 2 RS 232 or TTL; 2 status LED; etc

 

 GMM AM1284

grifo® Mini Module ATmega1284P

grifo® Mini Module has a 40 pin connector and it is based on Atmel ATmega1284P CPU witch 128K FLASH; 16K SRAM; 4K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels; 4 PWM; 8 A/D; 1 Comparetor; RTC + Lithium battery + 64Kb FRAM; I2C BUS; Master/Slave SPI Serial Interface; JTAG Interface; 32 TTL I/O lines; 2 RS 232 or TTL; 2 status LED; etc.

 

 GMM AM644

grifo® Mini Module ATmega644P

grifo® Mini Module has a 40 pin connector and it is based on Atmel ATmega644P CPU witch 64K FLASH; 4K SRAM; 2K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels; 4 PWM; 8 A/D; 1 Comparetor; RTC + Lithium battery + 64Kb FRAM; I2C BUS; Master/Slave SPI Serial Interface; JTAG Interface; 32 TTL I/O lines; 2 RS 232 or TTL; 2 status LED; etc.

 

 GMM AM32

grifo® Mini Module ATmega32L

grifo® Mini Module has a 40 pin connector and it is based on Atmel ATmega32L CPU witch 32K FLASH; 2K SRAM; 1K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels; 4 PWM; 8 A/D; 1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; Master/Slave SPI Serial Interface; JTAG Interface; 32 TTL I/O lines; RS 232 or TTL; 2 status LED; etc.

 

 GMM AM328

grifo® Mini Module ATmega328

grifo® Mini Module has a 28 pin connector and it is based on Atmel ATmega328 CPU with 32K FLASH; 2K SRAM; 1K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels; 6 PWM; 8 A/D; 1 Comparetor; I2C BUS; Master/Slave SPI Serial Interface; 23 TTL I/O lines; RS 232 or TTL; 1 status LED; etc.

 

 GMM AM08

grifo® Mini Module ATmega8L

grifo® Mini Module has a 28 pin connector and it is based on Atmel ATmega8L CPU with 8K FLASH; 1K SRAM; 512 Byte EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels; 3 PWM; 8 A/D; 1 Comparetor; I2C BUS; Master/Slave SPI Serial Interface; 23 TTL I/O lines; RS 232 or TTL; 1 status LED; etc.

 wpe1.jpg (4608 bytes)

FREE OF CHARGE

Theoretical/Practical Course on

BASCOM AVR

grifo® Mini Modules - PICCORE

 GMM 4620

grifo® Mini Module PIC18LF4620

grifo® Mini Module has a 40 pin connector and it is based on Microchip PIC18LF4620 CPU witch 64K FLASH; 4K SRAM; 1K EEPROM; 3 Timer Counter ; 2 PWM; 5 A/D; 33 TTL I/O lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; Master/Slave SPI; RS 232 or TTL; 2 status LED; etc.

 

 GMM 876

grifo® Mini Module PIC16F876A

grifo® Mini Module has a 28 pin connector and it is based on Microchip PIC16F876A CPU witch 14,3K FLASH; 368 byte SRAM; 256 byte EEPROM; 2 Timer Counter ; 2 PWM; 5 A/D; 22 TTL I/O lines;1 Comparetor; I2C BUS; Master/Slave SPI; RS 232 or TTL; 1 status LED; etc.

 

 GMM 886

grifo® Mini Module PIC16F886

grifo® Mini Module has a 28 pin connector and it is based on Microchip PIC16F886 CPU with 14,3K FLASH; 368 byte SRAM; 256 byte EEPROM; 4 Timer Counter ; 2 PWM; 11 A/D; Master/Slave SPI; In-Circuit Serial ProgrammingTM (ICSPTM) via Two Pins; 22 TTL I/O lines; 2-8 Comparetor; I2C BUS; Master/Slave SPI; RS 232 or TTL; 1 status LED; ecc.

grifo® Mini Modules - Accessories

CAN GMT

Controller Area Network - grifo® Mini Module Test

Low price card usefull for evaluating and test purpose of 28 pin Mini Modules type CAN GM1, CAN GM2, CANPIC, etc.. It provides: D9 connectors for a direct connections to CAN line and RS 232 line; power supply section with standard connector; push buttons and LEDs for digital I/O signals management; prototype area; etc.

GMM TST3

grifo® Mini Module Test 3

Low price card usefull for evaluating and test purpose of 28 or 40 pin grifo® Mini Modules type GMM 518, GMM AM08, GMM AM32, GMM 876, etc...It provides: D9 connectors for a direct connections to 2 RS 232 lines; Buzzer; Connector for PonyProg; Connector 6 pin for a direct connections to AVRISP MK2; Connector 10 pin for a direct connections to MP PIK/USB; Connector 6 pin for a direct connections to MPLAB® ICD 2; 16 Key buttons; 2 lines LCD display; power supply section with standard connector; push buttons and LEDs for digital I/O signals management; etc.

GMM TST4

grifo® Mini Module Test 4

Low price card usefull for evaluating and test purpose of 28 or 40 pin grifo® Mini Modules type GMM 518, GMM AM08, GMM AM32, GMM 876, etc...It provides: D9 connectors for a direct connections to 2 RS 232 lines; Buzzer; Connector 6 pin for a direct connections to AVRISP MK2; Plug Connector 6 pin for a direct connections to MPLAB® ICD 2; 16 Key buttons; 2 lines LCD display; power supply section with standard connector; push buttons and LEDs for digital I/O signals management; etc.

 AVRISP MKII 

Low-Cost ATMEL ISP Programmer for Micros AVR.

USB Interface.

 

 GMMPIC-PR

grifo® Mini Module Programmer

Low price card usefull for programmer 28 or 40 pin grifo® Mini Modules type GMM 876, GMM 4620, CANPIC, etc. It provides: ZIF 40 pin socket; D9 connectors for a direct connections to RS 232 line; Connectors RJ12 for MPLAB®; Connectors 10 pin for a direct connections to MP PIK+; power supply section with standard connector; 2 LEDs; etc.

GAB H844

GAB- Housing, 8 Alalog-In, 4 Opto-In, 4 Relay

Housing Analog BLOCK Module witch 8 Analog-In ,4 Opto-In, 4 Relay Outputs; Serial Line RS232 or TTL, RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

GMB HR84

GMB- Housing, 8 Opto-In, 4 Relay

Housing Mini BLOCK Module witch 8 Opto-In and 4 Relay Outputs; Serial Line RS232 or TTL, RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

GMB HR168

GMB - Housing, 16 Opto-In, 8 Relay

Housing Mini BLOCK Module witch 16 Opto-In and 8 Relay Outputs; 2 Serial Line RS232 or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

GMB HR246

GMB - Housing, 24 Opto-In, 16 Relay

Mini BLOCK Module witch 24 Opto-In and 16 Relay Outputs; 2 Serial Line RS232 or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.


Page up-dated at Dicember 23, 2013


homeHome Cat. Index Es. BAS. K51            Articles