grifo® Mini Module Burr-Brown
Doesn't Need Programmer.
the Serial Line.
GMM MSC1210 English Tech. Manual
Ver. xxx - Rel. xxx.
picture shows GMM MSC1210 that has the dimension
of DIP40 integrated circuit. The GMM
MSC1210 is equipped with Burr-Brown MSC1210 microcontroller.
GMM MSC1210 possible
- Integrated system that can be used directly on the board
developed by the user a macro component.
- Smart intelligent nodes with local functionalities as PID
algorithms for controlling temperatures, motors, valves, etc.
- Teleacquisition and telecontrol on medium and low distances.
- Home automation: lights turning ON/OFF, heating and cooling
systems control, supervision of electric devices, security and
acces control systems.
- Car automation: lights turning ON/OFF, heating and cooling
systems control, supervision of electric devices, anti-teft and
acces control systems, functionality checks.
- Didactics: GMM MSC1210 offers a very low cost to learn
8051 Core, we have many starter kits options.
- Whenever there is a short time to market: the user can see
a prototype or even a ready product in one week.
- Decentralized systems as robots, automation of production
line machines, big factory automations.
F E A T U R E
- Standard container with 40 pin male socket, dual in line,
100 mils pitch, 600 mils width.
- Very small dimension: 20,8 x 53,5 x 12,8 mm.
- Weight: 9,1 g.
- 4 layers printed circuit to obtain best noisy resistance
and best EMI performance.
- No external programmer is needed as GMM MSC1210 is
System Programming) Mini Module.
FLASH of Micro is Programmable and Erasable by using serial
- Single power supply required +5Vdc 48mA.
- Availability of power saving setting as idle mode and power
MSC1210 microcontroller (8051 code compatibile) with
xxx MHz crystal.
- Up to 32K RAM of External Addressing of Mini Module
- 32K FLASH for code, 2K FLASH for boot loader, 1,2K RAM for.
- Real Time Clock capable to manage day, month, year, week
day, hours, minutes, seconds and to generate periodic interrupts.
- 7/8 A/D converter channels
- Internal A/D reference voltage.
- 3 Timers Counters up to 16 bits
- Watch Dog section that protect the controlled system in any
- 29 digital I/O lines available on connector. Some of these
lines have multiple functions.
- Hardware serial line with programmable Baud Rate up to 115200
Baud, RS 232 buffered or at TTL level.
- Transceiver MAX3222E, for RS 232 serial line, with ESD protection
up to ±15KV.
- Reset and power supply control circuit based on MAX825.
- 2 status LEDs managed by software through digital I/O lines.
- Freeware software for PC, that supports the ISP programmation
to dowload the generated code, inside on board FLASH.
- Wide range of development tools as: Assembler (MCA51); C
compiler (µC/51, HTC51, SYS51CW, DDS Micro C51); BASIC
compiler (BASCOM 8051); PASCAL compiler (SYS51PW); etc.
- Long list of demo programs and use examples supplied under
source form, duly remarked, for the available development tools.
mostra la possibilità di indirizzamento esterna, fino
a 32K di FLASH/EPROM, da parte di un grifo® Mini Modulo
tipo GMM MSC1210.
picture shows the possibility of External Addressing up to
64K RAM of grifo® Mini
Module type GMM
|Bootloader program for grifo®
GMM MSC1210 type.
It allows to write the PROGRAM and DATA memory
available on Mini Module, through RS 232 serial
line only of PC.
picture shows grifo® Mini BLOCK GAB-H844 equipped with grifo®
Mini Module type
|SL_DATA (Technical Sheet) - GAB H844 and S-LOG create a Data Logger that
acquires both Analog and Digital lines from the
field and stores data and time on a Secure Digital card.
A C C E S
S O R I E S
Housing, 8 Alalog-In, 4 Opto-In, 4 Relay
Housing Analog BLOCK Module witch 8
Analog-In ,4 Opto-In, 4 Relay Outputs; Serial Line
RS232 or TTL, RS422/485, Current Loop;1 I2C
1 Serial Line USB
or CAN; Power Supply.
GMB - Housing,
16 Opto-In, 8 Relay
Housing Mini BLOCK Module witch 16
Opto-In and 8 Relay Outputs; Serial Line RS232 or TTL,
RS422/485, Current Loop; Power Supply.
Connector KIT Set, 4 pins
4 Female pins + AMP plastic housing
for GMB_HR84, etc..
AMP Cable Connector, 8 pins
1 m cable with 8 pins female AMP
connector for QTP_03, etc..
The EL 12 module is a complete, low cost, power
supply with extremely reduced dimension, that can be used in
conjunction with grifo®
cards as SDI 02, QTP 12, QTP 16Big, QTP 16,
QTP 22, QTP 24, QTP G28, etc.
W95/NT 8051-BASIC Compiler
BASCOM-8051© is a Windows BASIC
COMPILER for the 8051 family It is designed to run
on W95/NT and has all the features of BASCOM
LT. In addition it has full support for arrays and the single
floating point type.
µ C / 5 1
ANSI C Compiler
Develop high quality software for any 8051 in ANSI
C. µC/51 comes
with an incredible optimizing compiler, you can even write software
in ANSI C on 8051's with 1kB of code memory!
µC/51 is absolutely complete: user friendly multi
file Editor, Compiler, Assembler, Downloader, Source
Level Debugger. You will not need anything else.
dialect used is an almost complete version of Wirth's Pascal,
extended to, in a simple way, to take advantage of the special
hardware facilities contained in the 8051 and 80251 family chips.
Versions 5 and 6 furthermore contains objects and separately compiled
The LadderWORK Integrated
Development Enviroment (IDE)
The picture below, represents the apperance of the program
on your computer. LadderWORK has an integrated enviroment feature,
allowing you to draw schematics, compile programs and upload code
to PLC always working on the same window. The integrated enviroments
are composed by several parts described below.
Page up-dated at March 21, 2011