GMT GM1

grifo® ModBUS Telecontrol with CAN GM1

DEMO GMT program DownLoad This program runs the whole I/O functions the user needs for Telecontrol operations. G M T manual is under PDF format and it includes the user manual too.

The GMT implementation on the couple of cards GMB HR84 + CAN GM1, offers all the general features of this logic protocol, with the following specializations:

• Available electric protocols: RS-232, RS-422, RS-485, Current-Loop
• Physic protocol:
  - Baud rate: from 1.200 to 38.400 Baud with Autodetection
  - Odd, Even parity or No parity
  - 1 or 2 Stop Bits (when No parity is selected, 2 stop bits must be used);
• Available resources:
  - Buffered Digital Inputs = 8
  - Buffered Digital Outputs = 4
  - Analogue Inputs = 1
  - Analogue Outputs = 0
  - Counters = 4
  - PWM signals = 1
  - Backed SRAM = 240 Bytes
  - EEPROM = 2044 Bytes
  - RTC = Yes

EXPS 2 The EXPS 2 module is a complete, low cost, switching power supply with extremely reduced dimension, that can be used in conjunction with grifo® cards as GPC® R94, GPC® T94, GPC® R63, GPC® T63, GPC® R168, GPC® T168, QTP 12/R84, GMB HR84, etc.

House Automation Example. Connection of Sensors and Actuators.

Last Up-dated at July 11, 2006

GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALIA

Tel: +39 051 89.20.52 (4 linee r. a.)
FAX: +39 051 89.36.61

Home Cards Categorical Index