![]()
The RPC
08 is an output module packaged on a single EURO Size pcb,
for use with the ABACO® Industrial BUS.
The board comprises 8 Output lines wired to microrelays with changeover contacts, of which the operation is displayed by LEDs mounted to the front part.
Each line (NO and NC) is MOV-suppressed to minimize interference from the switching of reactive loads.
Typical applications are those calling for several logic outputs connected to double pole changeover relays, in modular units of 8; field interfacing problems are readily solved, and costs optimized at the same time.
The layout of the indicator LEDs, the adoption of a D connector and convenient software control combine to facilitate the use of the board enormously.
An advantageous feature RPC 08 is its ability to activate a check on the status of the 16 outputs, thereby affording more secure control.
The option exists of fitting a special front panel in aluminium for 3HE or 4TE Rack. This provides further screening and a secure anchorage by means of two relative screws. Removal is facilitated by the inclusion of a convenient front handle.
Data Sheet RPC 08, Rel. 94.5
GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALY
Tel: +39 051 892.052 (4 lines)
FAX: +39 051 893.661