PCI 16

Peripheral Coupled 16 Inputs

The PCI 16 is an input module packaged on a single EUROPA size pcb, for use with the ABACO® Industrial BUS.

The board comprises 16 Opto isolator coupled input lines with LED indicators mounted to the front part.

Typical applications are those calling for a number of logic inputs in modular units of 16.

his solves the problem of interfacing with a field, optimizing costs at the same time.

The layout of the LEDs, the adoption of a D connector and convenient software control combine to facilitate the use of the board enormously.

The option exists of fitting a special front panel in aluminium, 3HE, 4TE.

This affords further screening and a secure anchorage by means of two relative screws.

Removal is facilitated by the inclusion of a convenient front handle.

• Interface with ABACO® Industrial BUS
• Single Europe Size pcb measuring 100x160 mm
• 16 optoisolated NPN input lines, with indicator LEDs; nominal voltage selected on board between +12 and +24 Vdc
• Input lines with Greek-pi-filter
• Single 26-pin high density D connector
• Input port acquisition display circuitry
• Standard type address: 256 bytes of which two only busy; 8-bit BUS
• Option of mounting special front panel (3HE, 4TE)
• Single power supply voltage: +5 Vdc, 80 mA

Data Sheet PCI 16, Rel. 94.5

GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALY

Tel: +39 051 892.052 (4 lines)
FAX: +39 051 893.661

Home Cards Digital I/O Categorical Index