IBC CL

Interface Block Communication Current Loop

IBC CL English Tech. Manual PDF format.

Ver. 5.10 - Preliminary - Rel. 28 April 2003.

The most important function of IBC CL is the conversion of one RS 232 serial line in active Current Loop serial line. Thanks to this module the numerous systems that have RS 232 standard can be connected to the industrial devices that use current loop standard.

The main features of IBC CL module are:

• - conversion of RS 232 standard in Current Loop active standard;
• - active Current Loop line that can be connected up to 4 devices provided of passive Current Loop;
• - management of communication in full duplex modality;
• - maximum baud rate supported by Current Loop line: 19200 Baud;
• - single power supply from mains at 230 Vac or 110 Vac;
• - internal power supply section that ensures the nominal current value by changing the power supply voltage of Current Loop line;
• - current mantained on Current Loop line: 20 mA;
• - one quick release, screw terminal connector for power supply;
• - one 9 pins D male connector with standard pin out for RS 232 serial line;
• - one quick release, screw terminal connector for active Current Loop serial line;
• - two status LEDs that show the activity on Current Loop serial line;
• - handy plastic container for a direct mounting on table or electric panel;
• - small dimension: 135 x 90 x 70 mm;
• - weight: 450 g.

Data Sheet IBC CL, Rel. 02.02

GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALIA

Tel: +39 051 89.20.52 (4 linee r. a.)
FAX: +39 051 89.36.61

Home Cards Categorical Index