WMB 16
![](../../PROG/FOTO/Obsolet.gif)
Wide Mother
Board 16 slots
![](FOTO/wmb16.jpg)
Back panel WMB 16 has been designed to provide the User
support panels for interfacing many boards provided of industrial
Abaco® BUS. It includes all the mechanical features
for a direct mounting on any 3HE rack and it can host up
to twelve Abaco® BUS boards.
WMB 16 is the right choice for all the medium large
applications that must use at most 16 cards with Abaco®
BUS in a reduced space, getting size optimization and costs
reduction. Taking care of the numerous connectable cards the power
supply transport and filtering had been designed very carefully.
If WMB 16 is insufficent for , or it exceeds, the application
to build requirements, other back panels, belonging to grifo® industrial
cards listing, can be used to fulfil the requirements of the User
application.
- - Dimension: 130x405x30 mm suitable for 3 HE
rack mounting.
- - Slots pitch of 5 TE.
- - Double mechanical mounting boring with 3 TE pitch.
- - 16 slots for Abaco® BUS cards in Euro
size (100x160 mm) standard format, with DIN 41612 A+C,
type C, connectors.
- - Termination resistors on the BUS line to ensure
the correct functionality with not connected signals and CMOS
interfaces.
- - 3 LEDs for showing the power supply voltages
presence.
- - Reinforcement bars for a proper power supply transport.
- - Local key for RESET.
- - Noise filters distribuited on the power supply lines.
- - Low profile connector for remote mounting of power supply
LEDs and RESET key. With this feature the user
can place these devives far away from the electronics, for example
on the front side of the panel.
- - 4 pins AMP connector for power supply voltages:
+5 Vdc, +12 Vdc, -12 Vdc, according with
the used cards.
Data Shee WMB 16,
Rel. 00.10
Home
Cards
Categorical Index