MB4 01

Mother Board 4 slots

MB4 01 English Tech. Manual PDF format.

Ver. 5.00 - Rel. 19 March 2003.

Back panel MB4 01 has been designed to provide the User support panels for interfacing boards provided of industrial Abaco® BUS.

It includes all the mechanical features for a direct mounting on any 3HE rack and it can host up to three Abaco® BUS boards.

MB4 01 is the right choice for all the applications that must use at most 4 cards with Abaco® BUS in a very reduced space, getting size optimization and costs reduction.

If MB3 01 is insufficent for the application to build, other back panels, belonging to grifo® industrial cards listing, can be used to fulfil the requirements of the User application.

• - Dimension: 130x100x30 mm suitable for 3 HE rack mounting.
• - Slots pitch of 5 TE.
• - Double mechanical mounting boring with 3 TE pitch.
• - 4 slots for Abaco® BUS cards in Euro size (100x160 mm) standard format, with DIN 41612 A+C, type C, connectors.
• - 3 LEDs for showing the power supply voltages presence.
• - Noise filters distribuited on the power supply lines.
• - Local key for RESET.
• - Termination resistors on the BUS line to ensure the correct functionality with not connected signals and CMOS interfaces.
• - Low profile connector for remote mounting of power supply LEDs and RESET key. With this feature the user can place these devives far away from the electronics, for example on the front side of the panel.
• - 4 pins AMP connector for power supply voltages: +5 Vdc, +12 Vdc, -12 Vdc, according with the used cards.

Data Shee MB4 01, Rel. 00.10

Home Cards Categorical Index