CAN Controller Area Network - CAN Grifo® Mini Modules

CAN grifo® Mini Module

CAN - grifo® Mini Modules - 8 0 5 1 Core

CAN GM Zero

Controller Area Network - grifo® Mini Module Zero

This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 22 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.

CAN GM1

Controller Area Network - grifo® Mini Module 1

This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC01 CPU with 32K FLASH; 256 Byte RAM;1K ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 22 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.

CAN GM2

Controller Area Network - grifo® Mini Module 2

This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC02 CPU with 16K FLASH; 256 Byte RAM; 256 Byte ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels (for PWM, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 18 TTL I/O lines; 8 A/D 10 bit: RS 232 or TTL; CAN; 1 status LED; configuration dip switch; etc.

GMM AC Zero

grifo® Mini Module T89C51CC03

This grifo® Mini Module has a 40 pin connector and it is based on Atmel T89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 34 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.

GMM ACB Zero

grifo® Mini Module AT89C51CC03

This grifo® Mini Module has a 40 pin connector and it is based on Atmel AT89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 64K RAM External Addressing; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 34 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.

CAN - grifo® Mini Modules - A V R Core

CAN AVR

Controller Area Network - grifo® Mini Module AVR

grifo® Mini Module has a 28 pin connector and it is based on Atmel AT90CAN128 CPU witch 128K FLASH; 4K SRAM; 4K EEPROM; 3 Timer Counter ; 7 PWM; 5 A/D; 24 TTL I/O lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; JTAG Interface; I2C BUS; Master/Slave SPI; RS 232 or TTL; CAN; 2 status LED; 2 configuration dip switch; etc.

CAN - grifo® Mini Modules - PICCore

CANPIC

Controller Area Network - grifo® Mini ModulePIC

grifo® Mini Module has a 28 pin connector and it is based on Microchip PIC18LF4680 CPU witch 64K FLASH; 4K SRAM; 1K EEPROM; 3 Timer Counter ; 2 PWM; 13 A/D; 23 TTL I/O lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; Master/Slave SPI; RS 232 or TTL; CAN; 2 status LED; configuration dip switch; etc.

CAN grifo® Mini Module - ACCESSORIES

CAN GMT

Controller Area Network - grifo® Mini Module Test

Low price card usefull for evaluating and test purpose of 28 pin Mini Modules type CAN GM1, CAN GM2, etc.. It provides: D9 connectors for a direct connections to CAN line and RS 232 line; power supply section with standard connector; push buttons and LEDs for digital I/O signals management; prototype area; etc.

AVRISP MKII

Low-Cost ATMEL ISP Programmer for Micros AVR.

USB Interface.

GMMPIC-PR

grifo® Mini Module Programmer

Low price card usefull for programmer 28 or 40 pin grifo® Mini Modules type GMM 876, GMM 4620, CANPIC, etc. It provides: ZIF 40 pin socket; D9 connectors for a direct connections to RS 232 line; Connectors RJ12 for MPLAB®; Connectors 10 pin for a direct connections to MP PIK+; power supply section with standard connector; 2 LEDs; etc.

GAB H844

GAB- Housing, 8 Alalog-In, 4 Opto-In, 4 Relay

Housing Analog BLOCK Module witch 8 Analog-In ,4 Opto-In, 4 Relay Outputs; Serial Line RS232 or TTL, RS422/485, Current Loop;1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

GMB HR84

GMB- Housing, 8 Opto-In, 4 Relay

Housing Mini BLOCK Module witch 8 Opto-In and 4 Relay Outputs; Serial Line RS232 or TTL, RS422/485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

GMB HR168

GMB - Housing, 16 Opto-In, 8 Relay

Housing Mini BLOCK Module witch 16 Opto-In and 8 Relay Outputs; 2 Serial Line RS232 or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

GMB HR246

GMB - Housing, 24 Opto-In, 16 Relay

Mini BLOCK Module witch 24 Opto-In and 16 Relay Outputs; 2 Serial Line RS232 or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

CAN232

CAN232 is a very small dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial port) which eliminates the need for any extra drivers. Send and receive can be done in standard ASCII format.

CANUSB

CANUSB is a very small dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial port) which eliminates the need for any extra drivers. Send and receive can be done in standard ASCII format.

Which are the CAN MiniModules products and what are their features?

CAN MiniModule is a family of small embedded microcontroller boards in DIP format, provided of CAN line (Controller Area Network). Thanks to these modules the users can rapidly obtain new products as: digital I/O connected to CAN line, intelligent node that controls a motor through PID, acquisition systems for analog sensors located on the field, etc. In other words the CAN MiniModules are "System on Chip" provided of CAN connection.

Actually CAN MiniModules counts 3 products, based on Atmel T89C51CC01, T89C51CC02 at the other based on Atmel T89C51CC03. Both these microcontrollers uses FLASH technology and they are programmable directly on the board, through In System Programming (ISP) modality.

The CAN MiniModules products includes even an RS 232 transceiver and a RESET circuit that manage reset signal during power on and stop the microcontroller if power supply is under a security level. Moreover they are provided of CAN transceiver, compliant to ISO-11898 standard.

You can get further information about CAN MiniModules, as their detailed features and their development tools, by reading the proper technical data sheets.

Page up-dated at June 21, 2008

GRIFO®
Via dell'Artigiano, 8/6
40016 San Giorgio di Piano
Bologna ITALY

Tel: +39 051 892.052 (4 lines)
FAX: +39 051 893.661

Home Software Utility Tables Cat. Index Es. BAS. K51

CAN - grifo® Mini Modules - 8 0 5 1 Core
	CAN GM Zero Controller Area Network - grifo® Mini Module Zero This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 22 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.
	CAN GM1 Controller Area Network - grifo® Mini Module 1 This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC01 CPU with 32K FLASH; 256 Byte RAM;1K ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 22 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.
	CAN GM2 Controller Area Network - grifo® Mini Module 2 This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC02 CPU with 16K FLASH; 256 Byte RAM; 256 Byte ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels (for PWM, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 18 TTL I/O lines; 8 A/D 10 bit: RS 232 or TTL; CAN; 1 status LED; configuration dip switch; etc.
	GMM AC Zero grifo® Mini Module T89C51CC03 This grifo® Mini Module has a 40 pin connector and it is based on Atmel T89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 34 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.
	GMM ACB Zero grifo® Mini Module AT89C51CC03 This grifo® Mini Module has a 40 pin connector and it is based on Atmel AT89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 64K RAM External Addressing; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 34 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.
CAN - grifo® Mini Modules - A V R Core
	CAN AVR Controller Area Network - grifo® Mini Module AVR grifo® Mini Module has a 28 pin connector and it is based on Atmel AT90CAN128 CPU witch 128K FLASH; 4K SRAM; 4K EEPROM; 3 Timer Counter ; 7 PWM; 5 A/D; 24 TTL I/O lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; JTAG Interface; I2C BUS; Master/Slave SPI; RS 232 or TTL; CAN; 2 status LED; 2 configuration dip switch; etc.
CAN - grifo® Mini Modules - PICCore
	CANPIC Controller Area Network - grifo® Mini ModulePIC grifo® Mini Module has a 28 pin connector and it is based on Microchip PIC18LF4680 CPU witch 64K FLASH; 4K SRAM; 1K EEPROM; 3 Timer Counter ; 2 PWM; 13 A/D; 23 TTL I/O lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; Master/Slave SPI; RS 232 or TTL; CAN; 2 status LED; configuration dip switch; etc.
CAN grifo® Mini Module - ACCESSORIES
	CAN GMT Controller Area Network - grifo® Mini Module Test Low price card usefull for evaluating and test purpose of 28 pin Mini Modules type CAN GM1, CAN GM2, etc.. It provides: D9 connectors for a direct connections to CAN line and RS 232 line; power supply section with standard connector; push buttons and LEDs for digital I/O signals management; prototype area; etc.
	AVRISP MKII Low-Cost ATMEL ISP Programmer for Micros AVR. USB Interface.
	GMMPIC-PR grifo® Mini Module Programmer Low price card usefull for programmer 28 or 40 pin grifo® Mini Modules type GMM 876, GMM 4620, CANPIC, etc. It provides: ZIF 40 pin socket; D9 connectors for a direct connections to RS 232 line; Connectors RJ12 for MPLAB®; Connectors 10 pin for a direct connections to MP PIK+; power supply section with standard connector; 2 LEDs; etc.
	GAB H844 GAB- Housing, 8 Alalog-In, 4 Opto-In, 4 Relay Housing Analog BLOCK Module witch 8 Analog-In ,4 Opto-In, 4 Relay Outputs; Serial Line RS232 or TTL, RS422/485, Current Loop;1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.
	GMB HR84 GMB- Housing, 8 Opto-In, 4 Relay Housing Mini BLOCK Module witch 8 Opto-In and 4 Relay Outputs; Serial Line RS232 or TTL, RS422/485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.
	GMB HR168 GMB - Housing, 16 Opto-In, 8 Relay Housing Mini BLOCK Module witch 16 Opto-In and 8 Relay Outputs; 2 Serial Line RS232 or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.
	GMB HR246 GMB - Housing, 24 Opto-In, 16 Relay Mini BLOCK Module witch 24 Opto-In and 16 Relay Outputs; 2 Serial Line RS232 or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.
	CAN232 CAN232 is a very small dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial port) which eliminates the need for any extra drivers. Send and receive can be done in standard ASCII format.
	CANUSB CANUSB is a very small dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial port) which eliminates the need for any extra drivers. Send and receive can be done in standard ASCII format.