C A N

Controller Area Network

C P U - C a r d s

 

 GPC® 550

General Purpose Controller; 80C552 22 MHz PHILIPS CPU; 64K EPROM; 32K SRAM Lithium battery backed; 40 TTL I/O lines; 1/2 RS 232, RS 422 or RS 485 line; CAN linee; Watch Dog; Buzzer; 8 dip switch; 3 lines counter; 8 A/D 10 bits lines; 2 PWM; Real Time Clock Lithium battery backed; Abaco® BUS interface

 

 GPC® 883

General Purpose Controller AMD 80C188ES + CAN

grifo® Analog BLOCK - CAN - C P U

GAB H844

GAB- Housing, 8 Alalog-In, 4 Opto-In, 4 Relay

Housing Analog BLOCK Module witch 8 Analog-In ,4 Opto-In, 4 Relay Outputs; Serial Line RS232 or TTL, RS422/485, Current Loop;1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

grifo® Mini BLOCK - CAN - C P U

GMB HR84

GMB- Housing, 8 Opto-In, 4 Relay

Housing Mini BLOCK Module witch 8 Opto-In and 4 Relay Outputs; Serial Line RS232 or TTL, RS422/485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

GMB HR168

GMB - Housing, 16 Opto-In, 8 Relay

Housing Mini BLOCK Module witch 16 Opto-In and 8 Relay Outputs; 2 Serial Line RS232 or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

GMB HR246

GMB - Housing, 24 Opto-In, 16 Relay

Mini BLOCK Module witch 24 Opto-In and 16 Relay Outputs; 2 Serial Line RS232 or TTL; 1 Serial Line RS422, RS485, Current Loop; 1 I2C BUS line, 1 Serial Line USB or CAN; Power Supply.

QTP GPC® Type - C P U

QTP 12/R84

QTP 12, 8 Opto-In, 4 Relay

Quick Terminal Panels 12 keys; 1 LED; Graphic and Alphanumeric Display 20x2; Buzzer; Serial Line RS232, RS422/485, C. Loop; CAN; 8 Opto-in, 4 Relay, Power Supply.

QTP 16Big

QTP 16 Big - 3 Relay

Quick Terminal Panels Big 16 keys; 5 LED; Alphanumeric Display 20x4; 3 Relay; Buzzer; Serial Line RS232, RS422/485, C. Loop; CAN; Power Supply.

CAN - grifo® Mini Modules - 8 0 5 1 Core

CAN GM Zero

Controller Area Network - grifo® Mini Module Zero

This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 22 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.

CAN GM1

Controller Area Network - grifo® Mini Module 1

This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC01 CPU with 32K FLASH; 256 Byte RAM;1K ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 22 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.

CAN GM2

Controller Area Network - grifo® Mini Module 2

This CAN Mini Module has a 28 pin connector and it is based on Atmel T89C51CC02 CPU with 16K FLASH; 256 Byte RAM; 256 Byte ERAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timer Counter and 2 Programmable Counter Array channels (for PWM, compare, capture); RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; 18 TTL I/O lines; 6 A/D 10 bit: RS 232 or TTL; CAN; 1 status LED; configuration dip switch; etc.

CAN GMT

Controller Area Network - grifo® Mini Module Test

Low price card usefull for evaluating and test purpose of 28 pin Mini Modules type CAN GM1, CAN GM2, etc.. It provides: D9 connectors for a direct connections to CAN line and RS 232 line; power supply section with standard connector; push buttons and LEDs for digital I/O signals management; prototype area; etc.

GMM ACB Zero

grifo® Mini Module AT89C51CC03

This grifo® Mini Module has a 40 pin connector and it is based on Atmel AT89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 64K RAM External Addressing; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 34 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 2 status LEDs; configuration dip switch; etc.

GMM 518 Zero

grifo® Mini Module AT89C51CC03

This grifo® Mini Module has a 28 pin connector and it is based on Atmel AT89C51CC03 CPU with 64K FLASH; 2,2K RAM; 2K FLASH for Bootloader; 2K EEPROM; 3 Timers Counters and 5 Programmable Counter Array channels (for PWM, watch dog, compare, capture); 24 TTL I/O lines; 8 A/D 10 bits; RS 232 or TTL; CAN; 1 status LED; configuration jumper; etc.

FREE OF CHARGE

Theoretical/Practical Course on

BASCOM 8051

CAN - grifo® Mini Modules - A V R Core

 

 CAN AVR

Controller Area Network - grifo® Mini Module AVR

grifo® Mini Module has a 28 pin connector and it is based on Atmel AT90CAN128 CPU witch 128K FLASH; 4K SRAM; 4K EEPROM; 3 Timer Counter ; 7 PWM; 1 A/D; 24 TTL I/O lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; JTAG Interface; I2C BUS; Master/Slave SPI; RS 232 or TTL; CAN; 2 status LED; 2 configuration dip switch; etc.

CAN GMT

Controller Area Network - grifo® Mini Module Test

Low price card usefull for evaluating and test purpose of 28 pin Mini Modules type CAN GM1, CAN GM2, etc.. It provides: D9 connectors for a direct connections to CAN line and RS 232 line; power supply section with standard connector; push buttons and LEDs for digital I/O signals management; prototype area; etc.

 AVRISP MKII 

Low-Cost ATMEL ISP Programmer for Micros AVR.

USB Interface.

 wpe1.jpg (4608 bytes)

FREE OF CHARGE

Theoretical/Practical Course on

BASCOM AVR

CAN - grifo® Mini Modules - PICCore

 

 CANPIC

Controller Area Network - grifo® Mini ModulePIC

grifo® Mini Module has a 28 pin connector and it is based on Microchip PIC18LF4680 CPU witch 64K FLASH; 4K SRAM; 1K EEPROM; 3 Timer Counter ; 2 PWM; 5 A/D; 23 TTL I/O lines;1 Comparetor; RTC + 240 Bytes SRAM, backed by Lithium battery; I2C BUS; Master/Slave SPI; RS 232 or TTL; CAN; 2 status LED; configuration dip switch; etc.

CAN GMT

Controller Area Network - grifo® Mini Module Test

Low price card usefull for evaluating and test purpose of 28 pin Mini Modules type CAN GM1, CAN GM2, etc.. It provides: D9 connectors for a direct connections to CAN line and RS 232 line; power supply section with standard connector; push buttons and LEDs for digital I/O signals management; prototype area; etc.

 

 GMMPIC-PR

grifo® Mini Module Programmer

Low price card usefull for programmer 28 or 40 pin grifo® Mini Modules type GMM 876, GMM 4620, CANPIC, etc. It provides: ZIF 40 pin socket; D9 connectors for a direct connections to RS 232 line; Connectors RJ12 for MPLAB®; Connectors 10 pin for a direct connections to MP PIK+; power supply section with standard connector; 2 LEDs; etc.

COMMUNICATION

 

CAN 14

Control Area Network

1 CAN canale.

4 Type card.

PDF Manual

Q T P - Quick Terminal Panel

 QTP 12

Quick Terminal Panels 12 keys; 1 LED; Graphic and Alphanumeric Display 20x2; Buzzer; Serial Line RS232, RS422/485, C. Loop; CAN; Power Supply.

 

QTP 12H

Without keyboard; Graphic and Alphanumeric Display 20x2; Buzzer; Serial Line RS232, RS422/485, C. Loop; CAN; Power Supply.

QTP 16Big

QTP 16 Big - 3 Relay

Quick Terminal Panels Big 16 keys; 5 LED; Alphanumeric Display 20x4; 3 Relay; Buzzer; Serial Line RS232, RS422/485, C. Loop; CAN; Power Supply.

 

  QTP 16Big-H

QTP 16 Big - 3 Relay

Without keyboard; Alphanumeric Display 20x4; 3 Relay; Buzzer; Serial Line RS232, RS422/485, C. Loop; CAN; Power Supply.

QTP G28

Graphic Quik Terminal Panel 28 keys; 16 LEDs; Display LCD 240x128 pixels; Buzzer; 1 Opto-Coupled Serial line RS 232. Additional Opto-Coupled serial line RS 232, RS 422, RS 485, CAN, Current Loop; Built-in Power Supply.

INTERFACE

CAN232

 CAN232 is a very small dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial port) which eliminates the need for any extra drivers. Send and receive can be done in standard ASCII format.

 CANUSB

 CANUSB is a very small dongle that plugs into any PC COM Port, or any other RS232 port in an embedded system and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial port) which eliminates the need for any extra drivers. Send and receive can be done in standard ASCII format.


Page up-dated at September 03, 2011


homeHome Software CartellaUtility Tables Cat. Index Es. BAS. K51