SBP 01

Switching BLOCK Power, 4A

SBP 01 English Tech. Manual PDF format.

Ver.5.00 - Rel.. 04 March 2002.

The SBP 01 module is a complete, low cost, switching power supply with reduced dimension designed to solve all the power supply problems of the automation environment.

It is provided in a plastic container for a direct mounting on omega rails where it has a front side of only 70 mm, while two quick release scew terminal connectors allow the connections to external circuits. These features simplify and reduce the required time for mounting, installation, replacement and connection of the same card.

The SBP 01 generates all the standard voltages required by microprocessor based systems, starting from a single AC or DC low input voltage, so it respects the security norms.

Some LEDs on the front side inform about the presence of the output voltages and they add the possibility to visually diagnose any possible failure.

A very important feature of SBP 01 is an auxiliary input coming from an external battery; in this case it works like an UPS (Uninterruptible Power Supply), assuring power to the loads, with no discontinuity, even without external mains voltage.

The SBP 01 is available in 7 different models that have different generated voltages and different maximum load currents, as described in the following table:

Model	Voltage	Current	NOTE
SBP 01	5 Vdc	4 A	With Power Failure
SBP 01.12	12 Vdc	4 A	-
SBP 01.15	15 Vdc	4 A	-
SBP 01.24	24 Vdc	4 A	-
SBP 01.VT	5÷40 Vdc	4 A	Voltage regulated
SBP 01.VB	5÷40 Vdc	0,2÷4 A	Voltage and current regulated
SBP 01.3T	+5; +12; -12 Vdc	3,5 A; 0,15; 0,15 A	With Power Failure

The total supplied power is about 60 W in ambient temperature up to 60 °C, but with a proper forced ventilation a power of 120 W can be reached without problems.

• - BLOCK format, measuring 170x70x90 mm, complete of plastic container for omega rails DIN 247277-1 e 247277-3
• - Electrical connection by two comfortable screw terminal, quick release, 4 and 10 pins connectors
• - Up to 3 coloured LEDs which indicate the presence of the generated voltages, placed on the front side
• - Noises reduction filters on the inputs and outputs
• - Power failure digital signal that can be used as reset for the other cards
• - Reference and regolation signals available on connector
• - Protection on over temperature, over output voltage and short circuit
• - Input for auxiliary voltage from a 12, 24 Vdc battery, for UPS function
• - Medium performance higher than 80%
• - Required voltage: 6÷28 Vac or 8÷46 Vdc (according to selected model)
• - Generated voltages: variable according with selected model (see previous table)

Data Sheet SBP 01, Rel. 01.04

Home Cards Categorical Index CPU Tables